
At a Glance
- Kind
- A working timber raft: logs bound with crosspieces and lashings, guided downstream.
- River Roads
- The Main and Rhine around Mainz, the upper Rhine near Strasbourg, and other forest-fed river corridors.
- Crew
- Two working sweep stations; a third rafter sounds the channel, handles lines and watches ahead.
- Best Use
- Moving timber and modest additional loads downstream, with a safe landing chosen before nightfall.
- Main Dangers
- Weirs, bridge piers, shoals, crowded reaches and a lashing that parts at the wrong moment.
- Game Reference
- One 20-by-10-foot working section, its load, steering, damage and repairs.
A timber raft drifts round the river bend, its crew standing on wet logs. Two rafters lean into long steering sweeps while another sounds the channel with a pole. At the timber yard the lashings will be opened, the logs counted and the vessel itself sold.
A Moving Timber Yard
The raft is assembled at a place where forest tracks meet navigable water. Logs are sorted, brought alongside one another and bound beneath stout crosspieces. Sweeps at opposite ends let the crew alter its angle and edge towards a chosen channel. A raised platform keeps food, spare cordage and tools above the wash.
This is a working surface rather than an enclosed boat. Water comes through the gaps. A dropped tool may vanish between the logs, and a passenger cannot count on keeping boots or bedding dry. The timber may be worth far more than the handful of belongings above it.
Some journeys join several sections into a train, but a crew must know which reaches and landings can accept the resulting length. The handling profile below describes a single modest section. It does not give a long timber train the turning space of a small boat.
Along the River Roads
Builders and shipwrights downstream need the wood growing above them. On the Main and Rhine, rafters deliver timber towards busy trading towns; near Strasbourg they share the water with fishing boats, ferries and freight craft. Timber also travels through the river valleys of Bohemia towards Prague. The craft belongs to a broad river-working tradition, with local ways of choosing logs, binding them and reading the water.
A traveller may buy passage when the crew has room, but must arrive before the raft leaves its bank. Paying for space does not turn a delivery into a passenger service. At the destination the boat may be dismantled around the traveller’s feet. The crew returns by road, on another vessel or with the next available carrier.
Reading the Channel
The pilot chooses a bridge span well before reaching it. Another rafter watches the near bank for the dark line of a submerged snag; the person with the sounding pole calls the depth. Good crews agree on short calls that can be heard above rushing water. A command given too late can put the long side of the raft against a pier.
Low water strands the timber on gravel. High water carries it quickly past familiar landings. A mill weir is a route decision to make upstream, with time to take a side channel or find a place to break up the load. Dragging a line behind the raft can foul another boat, while trusting a rotten mooring can send the whole delivery away during the night.
For scouting a constricted reach, a small coracle or rowboat can reach the bank before the timber arrives. A scout still needs a way to signal back and enough room for the raft to answer.
The Bend Below the Mill
The raft enters the wrong branch just as the mill gates open. A line has caught around a buried post, pulling its front corner towards the weir. Two fishing boats lie below the outflow.
There is time to act. A scout can warn the fishing crews; someone on the bank can free or cut the trapped line; the sweep crews can work together to reach the sheltered margin. Cutting the raft’s main lashings releases floating logs into the same crowded water. It saves the people on the timber only if someone also protects those downstream.
The rafters will help strangers who put lives first. A traveller who saves the timber but abandons a boatman may still receive payment, but will find fewer friends at the next landing.
Timber Raft: Handling and Damage
Timber Raft — D&D 2024
Cost 50 GP, including two sweeps, a pole and lashings; Space 20 by 10 feet; Weight about 4,000 lb.; Crew two, usually three; Occupancy up to six Small or Medium creatures, including crew; Maximum Additional Load 4,000 lb., counting everyone and everything above the raft; AC 15; HP 120; Damage Threshold none; Immunities Poison and Psychic damage; Cover none.
Drift and Steering. At the end of each round the raft drifts with the current, normally 30 feet downstream. A seated or standing creature at each sweep must take a Utilize action during that round. Once both have done so, the pilot can shift the raft up to 10 feet sideways or rotate it up to 45 degrees before the drift. These actions do not cancel downstream movement. In still, shallow water, the same two actions pole it 5 feet instead. Travel speed is the river’s current, commonly about 3 miles per hour, or half a mile per hour when poled in still shallows.
Obstacles. Routine drifting needs no roll. To steer through a narrow bridge span or avoid a snag, the pilot makes a DC 14 Wisdom (Survival) check as part of steering. Failure loses the shift or turn. If drift then carries the raft into an obstruction, it and the struck creature or vessel each take 4d6 Bludgeoning damage. A creature struck by the raft can make a DC 13 Dexterity saving throw, taking half damage on success. Everyone standing on the raft makes a DC 12 Dexterity saving throw: failure knocks them Prone; failure by 5 or more throws them into the water.
Lashings and Repairs. Four main lashing bands each have AC 11 and 5 HP. An attack damaging a band does not also damage the hull. One severed band, or a hull at 60 HP or fewer, gives Disadvantage on handling checks; two severed bands prevent steering. At 0 hull HP the raft breaks into floating logs. With the raft safely moored, 1 hour, suitable woodworking tools and 1 GP of supplies restore 1d6 hull HP or replace one band. Exceeding the load prevents steering. Mooring requires reaching a safe bank and spending 1 minute securing lines.
Timber Raft — D&D 2014
Cost 50 gp with two sweeps, a pole and lashings; Dimensions 20 by 10 feet; Weight about 4,000 lb.; Crew two, usually three; Occupancy up to six Small or Medium creatures, including crew; Maximum Additional Load 4,000 lb., including all occupants and gear; AC 15; Hit Points 120; Damage Threshold none; Damage Immunities poison, psychic; Cover none.
Moving the Raft. The current carries it downstream at the end of each round, normally 30 feet. One creature at each of the two sweeps spends an action steering during the round. When both actions are taken, the pilot moves it up to 10 feet sideways or turns it up to 45 degrees before the drift. It still travels downstream. In calm shallows, those two actions move it 5 feet by poling instead. Sustained travel follows the current, commonly about 3 miles per hour; poling in still water gives half a mile per hour.
Handling and Collision. Ordinary drift needs no check. A narrow bridge span or threatening snag requires a DC 14 Wisdom check from the pilot as part of steering. Water-vehicle proficiency adds the pilot’s proficiency bonus. Failure loses the turn or lateral movement. A subsequent collision deals 4d6 bludgeoning damage to the raft and to the struck creature or vessel. A struck creature makes a DC 13 Dexterity saving throw for half damage. Standing occupants make a DC 12 Dexterity saving throw; failure knocks them prone, or throws them overboard on failure by 5 or more.
Damage. Each of four main lashing bands has AC 11 and 5 hit points; a band and the hull take damage separately. One broken band, or a hull at 60 hit points or fewer, imposes disadvantage on handling checks. Two broken bands prevent steering. At 0 hull hit points the logs separate and continue floating. Overloading prevents steering. At a safe bank, mooring takes 1 minute. Each hour of shore repair with woodworking tools and 1 gp of supplies restores 1d6 hull hit points or replaces one lashing band.
Timber Raft — Pathfinder 1e
Huge water vehicle; Squares 8 (10 by 20 feet); Price 50 gp with sweeps, pole and lashings; Weight about 4,000 lb.; AC 8; Hardness 5; hp 120 (broken at 59); Base Save +0; CMB +2; CMD 12, before the pilot’s driving modifier; Collision Damage 2d8; Crew two, usually three; Total Occupants six Small or Medium creatures; Additional Load 4,000 lb., including occupants and equipment; Decks one; no cover.
Current and Controls. One crew member works each end sweep; either station can be the pilot’s driving space. At round’s end the current moves the raft, normally 30 feet downstream. Both sweep operators spend a full-round action to shift it up to 10 feet sideways or turn it up to 45 degrees before that drift. In still shallow water they can instead pole it 5 feet. It has no upstream propulsion against a significant current. Overland speed follows the current; poling in calm water gives half a mile per hour.
Driving. Calm drifting needs no check. A narrow span or dangerous snag requires a DC 15 Profession (sailor) check from the pilot as part of the steering action. Survival can be used at DC 20. Failure prevents the shift or turn. If the current then carries it into an obstruction, the struck creature or vessel takes 2d8 damage and the raft takes half that roll before hardness. A struck creature can halve its damage with a DC 15 Reflex save. Standing occupants make a DC 15 Reflex save or fall prone; failure by 5 or more throws them overboard.
Structural Failure. Each of four main bands has AC 5, hardness 0 and 5 hp. Damage to a band does not reduce hull hp. One cut band or a broken hull imposes a –2 driving penalty; these two penalties do not stack. Two cut bands prevent steering. At 0 hull hp the logs separate. Overloading also prevents steering. At a safe bank, mooring takes 1 minute. An hour’s work, 1 gp of materials and a DC 15 Craft (ships) check restore 1d6 hull hp or replace a band; failure wastes the hour, not the materials.
Timber Raft — D&D 3.5e
Huge wooden object; Cost 50 gp with two sweeps, pole and lashings; Dimensions 20 by 10 feet; Weight about 4,000 lb.; AC 3 (–2 size, –5 Dexterity); Hardness 5; Hit Points 120; Break DC 24; Crew two, usually three; Occupancy up to six Small or Medium creatures; Maximum Additional Load 4,000 lb., including people and equipment; Cover none.
Propulsion. At the end of each round, current carries the raft downstream, normally 30 feet. Two creatures working opposite sweep stations each spend a full-round action to move it up to 10 feet sideways or turn it up to 45 degrees before the drift. In calm, shallow water they can instead pole it 5 feet. It cannot advance upstream against a significant current. Sustained speed follows the river; poling in still water gives half a mile per hour.
Steering and Impact. Routine drift requires no check. A narrow bridge span or snag calls for a DC 15 Profession (sailor) check as part of steering. Without ranks in that trained skill, the pilot instead makes a DC 15 Wisdom check. Failure loses the intended turn or shift. If drift then causes a collision, the struck creature or vessel takes 3d6 damage; the raft takes half the roll before hardness. A struck creature can halve its damage with a DC 15 Reflex save. Standing occupants make a DC 15 Reflex save or fall prone; failure by 5 or more throws them overboard.
Ropes and Timber. Four lashing bands each have AC 5, hardness 0 and 5 hit points; an attack damages its chosen band or the hull. One severed band, or hull damage leaving 60 hit points or fewer, imposes a –2 steering penalty; these penalties do not stack. At half hull hit points the break DC falls to 22. Two severed bands or an excessive load prevent steering. At 0 hull hit points the timber separates but keeps floating. Mooring at a safe bank takes 1 minute. One hour, 1 gp of supplies and a DC 15 Craft (shipmaking) check restore 1d6 hull hit points or replace a band; failure wastes time only.
Sources and Licensing
Historical background draws on UNESCO’s timber-rafting record, the Austrian UNESCO Commission’s account of river-rafting knowledge, and the research summary for Transport and trade in timber in pre-Hussite Bohemia and Prague, in Krajina středověké Prahy (Academia, 2024), pp. 655–679. Later industrial raft dimensions and modern machinery are excluded from this working section.
The four profiles, purchase price, load, lashing targets, steering procedures and river incident are original campaign equipment and writing. General reference points are D&D 2024 equipment, D&D 2014 equipment, the Pathfinder First Edition vehicle framework, and D&D 3.5e movement. These are not the printed statistics for another raft. The painted hero is an original illustration.
Keep this reference growing
If this page helped with your reading or game, you can support its upkeep or explore the curated books.
Explore the Bookshop — epics, classics and stories behind imagined worlds.
