- How Combat Works
- The Combat Round
- Determining Awareness
- The Surprise Round
- Unaware Combatants
- Initiative Tips from the Gamemastery Guide
- Speeding Combat
- Combat Statistics
- Attack Roll
- Automatic Misses and Hits
- Base Attack Bonus
- Other Modifiers
- Enhancement Bonuses
- Deflection Bonus
- Natural Armor
- Dodge Bonuses
- Size Modifier
- Minimum Damage
- Strength Bonus
- Off-Hand Weapon
- Wielding a Weapon Two-Handed
- Multiplying Damage
- Ability Damage
- Attacks of Opportunity
- Threatened Squares
- Reach Weapons
- Provoking an Attack of Opportunity
- Making an Attack of Opportunity
- Saving Throws
- Actions In Combat
- Action Types
- Standard Actions
- Melee Attacks
- “Armed” Unarmed
- Ranged Attacks
- Spells and Critical Hits
- Activate Magic Item
- Spell Completion Items
- Spell Trigger, Command Word, or Use-Activated Items
- Cast a Spell
- Casting on the Defensive
- Touch Spells in Combat
- Dismiss a Spell
- Start/Complete Full-Round Action
- Use Special Ability
- Spell-Like Abilities (Sp)
- Casting a Metamagic Spell
- Restricted Withdraw
- Free Actions
- Dying (Negative Hit Points)
- Minimum Movement
- Combat Maneuvers
- Combat Maneuver Bonus
- Special Size Modifier
- Performing a Combat Maneuver
- Combat Maneuver Defense
- Special Size Modifier
- Miscellaneous Modifiers
- Determine Success
- Bull Rush
- Dirty Trick
- Casting Spells While Mounted
- If Your Mount Falls in Battle
- If You Are Dropped
- Double Weapons
- Thrown Weapons
- Special Initiative Actions
- Initiative Consequences of Delaying
- Readying an Action
- Initiative Consequences of Readying
- Distracting Spellcasters
- Readying to Counterspell
- Readying a Weapon against a Charge
How Combat Works
Combat is cyclical; everybody acts in turn in a regular cycle of rounds.
Combat follows this sequence:
- When combat begins, all combatants roll initiative.
- Determine which characters are aware of their opponents. These characters can act during a surprise round. If all the characters are aware of their opponents, proceed with normal rounds. See the surprise section for more information.
- After the surprise round (if any), all combatants are ready to begin the first normal round of combat. Combatants act in initiative order (highest to lowest).
- When everyone has had a turn, the next round begins with the combatant with the highest initiative, and steps 3 and 4 repeat until combat ends.
The Combat Round
Each round represents 6 seconds in the game world; there are 10 rounds in a minute of combat. A round normally allows each character involved in a combat situation to act.
Each round’s activity begins with the character with the highest initiative result and then proceeds in order. When a character’s turn comes up in the initiative sequence, that character performs his entire round’s worth of actions. (For exceptions, see Attacks of Opportunity and Special Initiative Actions.)
When the rules refer to a “full round”, they usually mean a span of time from a particular initiative count in one round to the same initiative count in the next round.
Effects that last a certain number of rounds end just before the same initiative count that they began on.
Initiative Checks At the start of a battle, each combatant makes an initiative check. An initiative check is a Dexterity check. Each character applies his or her Dexterity modifier to the roll, as well as other modifiers from feats, spells, and other effects. Characters act in order, counting down from the highest result to the lowest. In every round that follows, the characters act in the same order (unless a character takes an action that results in his or her initiative changing; see Special Initiative Actions).
If two or more combatants have the same initiative check result, the combatants who are tied act in order of total initiative modifier (highest first). If there is still a tie, the tied characters should roll to determine which one of them goes before the other.
Even if you can’t take actions, you retain your initiative score for the duration of the encounter.
When a combat starts, if you are not aware of your opponents and they are aware of you, you’re surprised.
Sometimes all the combatants on a side are aware of their opponents, sometimes none are, and sometimes only some of them are. Sometimes a few combatants on each side are aware and the other combatants on each side are unaware.
Determining awareness may call for Perception checks or other checks.
The Surprise Round
If some but not all of the combatants are aware of their opponents, a surprise round happens before regular rounds begin. In initiative order (highest to lowest), combatants who started the battle aware of their opponents each take a standard or move action during the surprise round. You can also take free actions during the surprise round. If no one or everyone is surprised, no surprise round occurs.
Combatants who are unaware at the start of battle don’t get to act in the surprise round. Unaware combatants are flat-footed because they have not acted yet, so they lose any Dexteritybonus to AC.
Initiative Tips from the Gamemastery Guide
|Keeping track of whose turn it is during combat can be complicated. Combat is the most complex part of the game, and the easiest place for a session to bog down.|
Anything that helps speed up combat means everyone gets more done and has more opportunities for fun. The simplest way of handling this is to
record each PC and monster name on a card; when combat starts, write each creature’s initiative score on its card and sort them into the initiative
order. Thereafter, determining who’s next to act is just a matter of cycling through the cards. Ambitious GMs can add info to the monsters’ cards, such as hit points, special attack DCs, and other information relating to what the monster can do on its turn. (This can also be a useful place to record PC Perception checks and saves, so that you can make secret checks without asking players for their statistics.) Especially detailed initiative cards that resemble character sheets, with room for all of a creature’s relevant data, can remove the need to refer to a book. Another method is using a larger surface like a cork board, marker board, or dry-erase board to track PC and monster initiative and status. If positioned so the players can see it as well, this also lets them know when their turns are coming up so they can plan ahead. Paizo’s Game Mastery Combat Pad is a handy page-sized version of this – a magnetic dry/wet-erase board with dry/wet-erase magnets to indicate PCs and monsters. While it fulfills the same function as a pad of paper, the creature magnets make it easy to adjust initiative order for readied and delayed actions, and saves the GM the time and effort of rewriting all the PC names for every combat.
Display the Combat Order: If a PC knows what the current tick of the initiative clock is and knows when the participants get to act, he knows when his turn is coming up and can plan for what he wants to do. This means instead of hemming and hawing for a minute at the start of his turn, he can hem and haw during the previous player’s turn and be ready when it’s his turn. It also lets the PCs coordinate their actions together -while stingy GMs may see this as cheating or metagaming,remember that the turn-based initiative system is just a tool to simulate real-time combat in a way that doesn’t take forever, and in a real combat, people on the same side wouldn’t be locked into only acting in a specific order without awareness of each others’ intent.
Five Second Rule: If the players can see who’s up next in the initiative order, they have no excuse for not knowing what’s going on or what their characters want to do. If a PC’s turn comes up and the player takes more than a few seconds to announce his character’s action, skip him as if he had chosen to delay his action and move on to the next creature’s turn -after all, combat is hectic, and sometimes in the thick of battle you need a second or two to focus. This doesn’t cost the PC any actions, so they’re only penalized their position in the initiative, and it hopefully encourages them to pay more attention to what’s happening. Note that speeding up combat in general means players get to act more often and are less likely to get distracted between their turns, so the rest of these tips should make this one less necessary. Note also that you should let players know in advance that you’re going to do this, as springing it on them unexpectedly can seem vindictive.
Plan and Combine Dice Rolls: Rolling attacks and damage separately takes twice as long as rolling them all together. Save time by coordinating your attack roll dice with your damage roll dice so you can roll them at the same time, and encourage players to do the same. For example, if the PCs are fighting four orcs, each with a falchion, get four different-colored d20s and a pair of matching d4s for each orc, then roll all 12 dice at the same time; if the red d20 and green d20 are hits, you know to look at the red d4s and the green d4s and ignore the blue d4s and purple d4s. If the PCs are fighting a dire lion, you can color-coordinate the bite’s d8 die with one d20 and two claw d6 dice with two other d20s, and roll all the dice at once. Be aware, however, that while rolling attack and damage at the same time is always a good idea, rolling all your attacks at once can be problematic if you (or your players) want to split the attacks between multiple opponents – if you don’t carefully assign each attack before you roll, it’s tempting to say that two of those three attacks which would have missed the main villain were actually directed at his weaker henchmen, whether or not that was your original intention.
This section summarizes the statistics that determine success in combat, then details how to use them.
An attack roll represents your attempt to strike your opponent on your turn in a round. When you make an attack roll, you roll a d20 and add your attack bonus. (Other modifiers may also apply to this roll.) If your result equals or beats the target’s Armor Class, you hit and deal damage.
Automatic Misses and Hits
A natural 1 (the d20 comes up 1) on an attack roll is always a miss. A natural 20 (the d20 comes up 20) is always a hit. A natural 20 is also a threata possible critical hit (see the attack action).
Base Attack Bonus
|Source: d20srd.org |
A base attack bonus is an attack roll bonus derived from character class and level or creature type and Hit Dice (or combination’s thereof). Base attack bonuses increase at different rates for different character classes and creature types.
A second attack is gained when a base attack bonus reaches +6, a third with a base attack bonus of +11 or higher, and a fourth with a base attack bonus of +16 or higher. Base attack bonuses gained from different sources, such as when a character is a multiclass character, stack.
Many other factors modify your AC.
Enhancement bonuses apply to your armor to increase the armor bonus it provides.
Magical deflection effects ward off attacks and improve your AC.
If your race has a tough hide, scales, or thick skin you receive a bonus to your AC.
Dodge bonuses represent actively avoiding blows. Any situation that denies you your Dexterity bonus also denies you dodge bonuses. (Wearing armor, however, does not limit these bonuses the way it limits a Dexteritybonus to AC.) Unlike most sorts of bonuses, dodge bonuses stack with each other.
You receive a bonus or penalty to your AC based on your size.
If your attack succeeds, you deal damage. The type of weapon used determines the amount of damage you deal.
Damage reduces a target’s current hit points.
If penalties reduce the damage result to less than 1, a hit still deals 1 point of nonlethal damage.
When you hit with a melee or thrown weapon, including a sling, add your Strength modifier to the damage result. A Strength penalty, but not a bonus, applies on damage rolls made with a bow that is not a composite bow.
Wielding a Weapon Two-Handed
When you deal damage with a weapon that you are wielding two-handed, you add 1-1/2 times your Strength bonus (Strength penalties are not multiplied). You don’t get this higher Strength bonus, however, when using a light weapons with two hands.
|FAQ/Errata What kind of action is it to remove your hand from a two-handed weapon or re-grab it with both hands? Both are free actions. For example, a wizard wielding a quarterstaff can let go of the weapon with one hand as a free action, cast a spell as a standard action, and grasp the weapon again with that hand as a free action; this means the wizard is still able to make attacks of opportunity with the weapon (which requires using two hands).|
As with any free action, the GM may decide a reasonable limit to how many times per round you can release and re-grasp the weapon (one release and re-grasp per round is fair).
Sometimes you multiply damage by some factor, such as on a critical hit. Roll the damage (with all modifiers) multiple times and total the results.
Note: When you multiply damage more than once, each multiplier works off the original, unmultiplied damage. So if you are asked to double the damage twice, the end result is three times the normal damage.
Exception: Extra damage dice over and above a weapon’s normal damage are never multiplied.
Certain creatures and magical effects can cause temporary or permanent ability damage (a reduction to an ability score).
Attacks of Opportunity
Sometimes a combatant in a melee lets her guard down or takes a reckless action. In this case, combatants near her can take advantage of her lapse in defense to attack her for free. These free attacks are called attacks of opportunity. See the Attacks of Opportunity diagram for an example of how they work.
You threaten all squares into which you can make a melee attack, even when it is not your turn. Generally, that means everything in all squares adjacent to your space (including diagonally). An enemy that takes certain actions while in a threatened square provokes an attack of opportunity from you. If you’re unarmed, you don’t normally threaten any squares and thus can’t make attacks of opportunity.
Most creatures of Medium or smaller size have a reach of only 5 feet. This means that they can make melee attacks only against creatures up to 5 feet (1 square) away. However, Small and Medium creatures wielding reach weapons threaten more squares than a typical creature. In addition, most creatures larger than Medium have a natural reach of 10 feet or more.
Provoking an Attack of Opportunity
Two kinds of actions can provoke attacks of opportunity: moving out of a threatened square and performing certain actions within a threatened square.
Moving out of a threatened square usually provokes attacks of opportunity from threatening opponents. There are two common methods of avoiding such an attack – the 5-foot step and the withdraw action.
Performing a Distracting Act
Some actions, when performed in a threatened square, provoke attacks of opportunity as you divert your attention from the battle. Table: Actions in Combat notes many of the actions that provoke attacks of opportunity.
Remember that even actions that normally provoke attacks of opportunity may have exceptions to this rule.
Making an Attack of Opportunity
An attack of opportunity is a single melee attack, and most characters can only make one per round. You don’t have to make an attack of opportunity if you don’t want to. You make your attack of opportunity at your normal attack bonus, even if you’ve already attacked in the round.
An attack of opportunity “interrupts” the normal flow of actions in the round. If an attack of opportunity is provoked, immediately resolve the attack of opportunity, then continue with the next character’s turn (or complete the current turn, if the attack of opportunity was provoked in the midst of a character’s turn).
Combat Reflexes and Additional Attacks of Opportunity
If you have the Combat Reflexes feat, you can add your Dexterity modifier to the number of attacks of opportunity you can make in a round. This feat does not let you make more than one attack for a given opportunity, but if the same opponent provokes two attacks of opportunity from you, you could make two separate attacks of opportunity (since each one represents a different opportunity). Moving out of more than one square threatened by the same opponent in the same round doesn’t count as more than one opportunity for that opponent. All these attacks are at your full
normal attack bonus.
Your speed tells you how far you can move in a round and still do something, such as attack or cast a spell. Your speed depends mostly on your size and your armor.
Dwarves, gnomes, and halflings have a speed of 20 feet (4 squares), or 15 feet (3 squares) when wearing medium or heavy armor (except for dwarves, who move 20 feet in any armor).
Humans, elves, half-elves, half-orcs, and most humanoid monsters have a speed of 30 feet (6 squares), or 20 feet (4 squares) in medium or heavy armor.
If you use two move actions in a round (sometimes called a “double move” action), you can move up to double your speed. If you spend the entire round running, you can move up to quadruple your speed (or triple if you are in heavy armor).
Generally, when you are subject to an unusual or magical attack, you get a saving throw to avoid or reduce the effect. Like an attack roll, a saving throw is a d20 roll plus a bonus based on your class and level (see Classes), and an associated ability score.
Your saving throw modifier is:
Base save bonus + ability modifier
Saving Throw Types
The three different kinds of saving throws are Fortitude, Reflex, and Will:
These saves measure your ability to stand up to physical punishment or attacks against your vitality and health. Apply your Constitution modifier to your Fortitude saving throws.
These saves test your ability to dodge area attacks and unexpected situations. Apply your Dexterity modifier to your Reflex saving throws.
These saves reflect your resistance to mental influence as well as many magical effects. Apply your Wisdom modifier to your Will saving throws.
Saving Throw Difficulty Class
The DC for a save is determined by the attack itself.
Automatic Failures and Successes
A natural 1 (the d20 comes up 1) on a saving throw is always a failure (and may cause damage to exposed items; see Items Surviving after a Saving Throw). A natural 20 (the d20 comes up 20) is always a success.
Actions In Combat
During one turn, there are a wide variety of actions that your character can perform, from swinging a sword to casting a spell.
|Actions in Combat|
|Standard Action||Attack of Opportunity1|
|Activate a magic item other than a potion or oil||No|
|Cast a spell (1 standard action casting time)||Yes|
|Concentrate to maintain an active spell||No|
|Dismiss a spell||No|
|Draw a hidden weapon (see Sleight of Hand skill)||No|
|Drink a potion or apply an oil||Yes|
|Escape a grapple||No|
|Light a torch with a tindertwig||Yes|
|Read a scroll||Yes|
|Ready (triggers a standard action)||No|
|Stabilize a dying friend (see Heal skill)||Yes|
|Use extraordinary ability||No|
|Use skill that takes 1 action||Usually|
|Use spell-like ability||Yes|
|Use supernatural ability||No|
|Move Action||Attack of Opportunity1|
|Control a frightened mount||Yes|
|Direct or redirect an active spell||No|
|Draw a weapon3||No|
|Load a hand crossbow or light crossbow||Yes|
|Open or close a door||No|
|Mount/dismount a steed||No|
|Move a heavy object||Yes|
|Pick up an item (see FAQ)||Yes (see FAQ)|
|Sheathe a weapon||Yes|
|Stand up from prone||Yes|
|Ready or drop a shield3||No|
|Retrieve a stored item||Yes|
|Full-Round Action||Attack of Opportunity1|
|Deliver coup de grace||Yes|
|Escape from a net||Yes|
|Light a torch||Yes|
|Load a heavy or repeating crossbow||Yes|
|Lock or unlock weapon in locked gauntlet||Yes|
|Prepare to throw splash weapon||Yes|
|Use skill that takes 1 round||Usually|
|Use a touch spell on up to six friends||Yes|
|Free Action||Attack of Opportunity1|
|Cease concentration on a spell||No|
|Drop an item||No|
|Drop to the floor||No|
|Prepare spell components to cast a spell5||No|
|Swift Action||Attack of Opportunity1|
|Cast a quickened spell||No|
|Immediate Action||Attack of Opportunity1|
|Cast feather fall||No|
|No Action||Attack of Opportunity1|
|Action Type Varies||Attack of Opportunity1|
|Perform a combat maneuver6||Yes|
|1 Regardless of the action, if you move out of a threatened square, you usually provoke an attack of opportunity. This column indicates whether theaction itself, not moving, provokes an attack of opportunity. |
2 If you aid someone performing an action that would normally provoke an attack of opportunity, then the act of aiding another provokes an attack of opportunity as well.
3 If you have a base attack bonus of +1 or higher, you can combine one of these actions with a regular move. If you have the Two-Weapon Fighting feat, you can draw two light or one-handed weapons in the time it would normally take you to draw one.4 May be taken as a standard action if you are limited to taking only a single action in a round.
5 Unless the component is an extremely large or awkward item.
6 Some combat maneuvers substitute for a melee attack, not an action. As melee attacks, they can be used once in an attack or charge action, one or more times in a full-attack action, or even as an attack of opportunity. Others are used as a separate action.
7 The description of a feat defines its effect.
Can you pick up or manipulate an object in a square within your reach? Does this provoke an AOO? Does it provoke even if the foe can reach the object, but not your space?The rules are a little hazy here, but to put it simply, you can affect objects and creatures within your reach. When picking up or manipulating objects, you generally provoke an attack of opportunity, but only against foes that can reach your space.
You do not provoke attacks of opportunity from foes that cannot reach you, no matter what action you are taking, even if it includes reaching into a threatened space. Although it might seem realistic to allow an attack in such a case, it would make the game far too complicated.
An action’s type essentially tells you how long the action takes to perform (within the framework of the 6-second combat round) and how movement is treated.
There are six types of actions:
In a normal round, you
can perform a standard action and a move action, or you can perform a full-round
action. You can also perform one swift action and one or more free actions.
You can always take a move action in place of a standard action.
In some situations (such
as in a surprise round), you may be limited to taking only a single move action
or standard action.
A standard action allows you to do something, most commonly to make an attack or cast a spell. See Table: Actions in Combat for other standard actions.
A move action allows you to move up to your speed or perform an action that takes a similar amount of time. See Table: Actions in Combat for other move actions.
You can take a move action in place of a standard action. If you move no actual distance in a round (commonly because you have swapped your move action for one or more equivalent actions), you can take one 5-foot step either before, during, or after the action.
A full-round action consumes all your effort during a round. The only movement you can take during a full-round action is a 5-foot step before, during, or after the action. You can also perform free actions and swift actions (see below). See Table: Actions in Combat for
a list of full-round actions.
Some full-round actions do not allow you to take a 5-foot step.
Some full-round actions can be taken as standard actions, but only in situations when you are limited to performing only a standard action during your round. The descriptions of specific actions detail which actions allow this option.
Free actions consume a very small amount of time and effort. You can perform one or more free actions while taking another action normally. However, there are reasonable limits on what you can really do for free, as decided by the GM.
A swift action consumes a very small amount of time, but represents a larger expenditure of effort and energy than a free action. You can perform only a single swift action per turn.
An immediate action is very similar to a swift action, but can be performed at any time even if it’s not your turn.
Not an Action
Some activities are so minor that they are not even considered free actions. They literally don’t take any time at all to do and are considered an inherent part of doing something else, such as nocking an arrow as part of an attack with a bow.
In some situations, you
may be unable to take a full round’s worth of actions. In such cases, you are
restricted to taking only a single standard action or a single move action (plus
free and swift actions as normal). You can’t take a full-round action (though
you can start or complete a full-round action by using a standard action; see
Most of the common actions
characters take, aside from movement, fall into the realm of standard actions.
Making an attack is a standard
With a normal melee weapon, you can strike any opponent within 5 feet. (Opponents within 5 feet are considered adjacent to you.) Some melee weapons have reach, as indicated in their descriptions. With a typical reach weapon, you can strike opponents 10 feet away, but you can’t strike adjacent foes (those within 5 feet).
Striking for damage with punches, kicks, and head butts is much like attacking with a melee weapon, except for the following:
Attacks of Opportunity: Attacking unarmed provokes an attack of opportunity from the character you attack, provided she is armed. The attack of opportunity comes before your attack. An unarmed attack does not provoke attacks of opportunity from other foes, nor does it provoke an attack of opportunity from an unarmed foe.
An unarmed character can’t take attacks of opportunity (but see “Armed” Unarmed Attacks, below).
Attacks: Sometimes a character’s or creature’s unarmed attack counts as an armed attack. A monk, a character with the Improved Unarmed Strike feat, a spellcaster delivering a touch attack spell, and a creature with natural physical weapons all count as being armed (see natural attacks).
Note that being armed counts for both offense and defense (the character can make attacks of opportunity).
Unarmed Strike Damage: An unarmed strike from a Medium character deals 1d3 points of bludgeoning damage (plus your Strength modifier,
as normal). A Small character’s unarmed strike deals 1d2 points of bludgeoning damage, while a Large character’s unarmed strike deals 1d4 points of bludgeoning damage. All damage from unarmed strikes is nonlethal damage. Unarmed strikes count as shed light (for purposes of two-weapon attack penalties and so on).
Dealing Lethal Damage: You can specify that your unarmed strike will deal lethal damage before you make your attack roll, but you take a -4 penalty on your attack roll. If you have the Improved Unarmed Strike feat, you can deal lethal damage with an unarmed strike without taking a penalty on the attack roll.
With a ranged weapon, you can shoot or throw at any target that is within the weapon’s maximum range and in line of sight. The maximum range for a thrown weapon is five range increments. For projectile weapons, it is 10 range increments. Some ranged weapons have
shorter maximum ranges, as specified in their descriptions.
Shooting or Throwing into a Melee
If you shoot or throw a ranged weapon at a target engaged in melee with a friendly character, you take a -4 penalty on your attack roll. Two characters are engaged in melee if they are enemies of each other and either threatens the other. (An unconscious or otherwise immobilized character is not considered engaged unless he is actually being attacked.)
If your target (or the part of your target you’re aiming at, if it’s a big target) is at least 10 feet away from the nearest friendly character, you can avoid the -4 penalty, even if the creature you’re aiming at is engaged in melee with a friendly character.
If your target is two size categories larger than the friendly characters it is engaged with, this penalty is reduced to -2. There is no penalty for firing at a creature that is three size categories larger than the friendly characters it is engaged with.
Precise Shot: If you have the Precise Shot feat, you don’t take this penalty.
Attacks made with natural weapons, such as claws and bites, are melee attacks that can be made against any creature within your reach (usually 5 feet). These attacks are made using your full attack bonus and deal an amount of damage that depends on their type (plus your Strength modifier, as normal). You do not receive additional natural attacks for a high base attack bonus. Instead, you receive additional attack
rolls for multiple limb and body parts capable of making the attack (as noted by the race or ability that grants the attacks). If you possess only one natural attack (such as a bite – two claw attacks do not qualify), you add 1-1/2 times your Strength bonus on damage rolls made with that attack.
Some natural attacks are denoted as secondary natural attacks, such as tails and wings. Attacks with secondary natural attacks are made using your base attack bonus minus 5. These attacks deal an amount of damage depending on their type, but you only add half your Strength modifier on damage rolls.
You can make attacks with natural weapons in combination with attacks made with a melee weapon and unarmed strikes, so long as a different limb is used for each attack. For example, you cannot make a claw attack and also use that hand to make attacks with a longsword. When you make additional attacks in this way, all of your natural attacks are treated as secondary natural attacks, using your base attack bonus minus 5 and adding only 1/2 of your Strength modifier on damage rolls. Feats such as Two-Weapon Fighting and Multiattack can reduce these penalties.
A character who can make more than one attack per round must use the full-attack action (see Full-Round Actions) in order to get more than one attack.
Fighting Defensively as a Standard Action
You can choose to fight defensively when attacking. If you do so, you take a -4 penalty on all attacks in a round to gain a +2 to AC until the start of your next turn.
When you make an attack roll and get a natural 20 (the d20 shows 20), you hit regardless of your target’s Armor Class, and you have scored a “threat,” meaning the hit might be a critical hit (or “crit”). To find out if it’s a critical hit, you immediately make an attempt to “confirm” the critical hitanother attack roll with all the same modifiers as the attack roll you just made. If
the confirmation roll also results in a hit against the target’s AC, your original
hit is a critical hit. (The critical roll just needs to hit to give you a crit,
it doesn’t need to come up 20 again.) If the confirmation roll is a miss, then
your hit is just a regular hit.
A critical hit means that
you roll your damage more than once, with all your usual bonuses, and add the
rolls together. Unless otherwise specified, the threat range for a critical
hit on an attack roll is 20, and the multiplier is ×2.
damage (such as from a rogue’s sneak attack class feature) and additional damage
dice from special weapon qualities (such as flaming) are not multiplied when
you score a critical hit.
Increased Threat Range
Sometimes your threat range
is greater than 20. That is, you can score a threat on a lower number. In such
cases, a roll of lower than 20 is not an automatic hit. Any attack roll that
doesn’t result in a hit is not a threat.
Increased Critical Multiplier
Some weapons deal better
than double damage on a critical hit (see Equipment).
Spells and Critical Hits
A spell that requires an attack roll can score a critical hit. A spell attack that requires no attack roll cannot score a critical hit. If a spell causes ability damage or drain (see Special Abilities), the damage or drain is doubled on a critical hit.
Activate Magic Item
Many magic items don’t need to be activated. Certain magic items, however, do need to be activated, especially potions, scrolls, wands, rods, and staves. Unless otherwise noted, activating a magic item is a standard action.
Spell Completion Items
Activating a spell completion item is the equivalent of casting a spell. It requires concentration and provokes attacks of opportunity. You lose the spell if your concentration is broken, and you can attempt to activate the item while on the defensive, as with casting a spell.
Spell Trigger, Command Word, or Use-Activated Items
Activating any of these kinds of items does not require concentration and does not provoke attacks of opportunity.
Cast a Spell
Most spells require 1 standard action to cast. You can cast such a spell either before or after you take a move action.
Note: You retain your Dexterity bonus to AC while casting.
You must concentrate to cast a spell. If you can’t concentrate, you can’t cast a spell. If you start casting a spell but something interferes with your concentration, you must make a concentration check or lose the spell. The check’s DC depends on what is threatening your concentration (see Magic). If you fail, the spell fizzles with no effect. If you prepare spells, it is lost from preparation. If you cast at will, it counts against your daily limit of spells even though you did not cast it successfully.
Concentrating to Maintain a Spell: Some spells require continued concentration to keep them going. Concentrating to maintain a spell is a standard action that doesn’t provoke an attack of opportunity. Anything that could break your concentration when casting a spell can keep you from concentrating to maintain a spell. If your concentration breaks, the spell ends.
Most spells have a casting
time of 1 standard action. A spell cast in this manner immediately takes effect.
Attacks of Opportunity
Generally, if you cast
a spell, you provoke attacks of opportunity from threatening enemies. If you
take damage from an attack of opportunity, you must make a concentration
check (DC 10 + points of damage taken + the spell’s level) or lose the spell.
Spells that require only a free action to cast don’t provoke attacks of opportunity.
Casting on the Defensive
Casting a spell while on the defensive does not provoke an attack of opportunity. It does, however, require a concentration check (DC 15 + double the spell’s level) to successfully cast the spell. Failure means that you lose the spell.
Touch Spells in Combat
Many spells have a range of touch. To use these spells, you cast the spell and then touch the subject. In the same round that you cast the spell, you may also touch (or attempt to touch) as a free action. You may take your move before casting the spell, after touching the target, or between casting the spell and touching the target. You can automatically touch one friend or use the spell on yourself, but to touch an opponent, you must succeed on an attack roll.
Touch Attacks: Touching an opponent with a touch spell is considered to be an armed attack and therefore does not provoke attacks of opportunity. The act of casting a spell, however, does provoke an attack of opportunity. Touch attacks come in two types: melee touch attacks and ranged touch attacks. You can score critical hits with either type of attack as long as the spell deals damage. Your opponent’s AC against a touch attack does not include any armor bonus, shield bonus, or natural armor bonus. His size modifier, Dexterity modifier, and deflection bonus (if any) all apply normally.
Holding the Charge: If you don’t discharge the spell in the round when you cast the spell, you can hold the charge indefinitely. You can continue to make touch attacks round after round. If you touch anything or anyone while holding a charge, even unintentionally, the spell discharges. If you cast another spell, the touch spell dissipates. You can touch one friend as a standard action or up to six friends as a full-round action. Alternatively, you may make a normal unarmed attack (or an attack with a natural weapon) while holding a charge. In this case, you aren’t considered armed and you provoke attacks of opportunity as normal for the attack. If your unarmed attack or natural weapon attack normally doesn’t provoke attacks of opportunity, neither does this attack. If the attack hits, you deal normal damage for your unarmed attack or natural weapon and the spell discharges. If the attack misses, you are still holding the charge.
Ranged Touch Spells in Combat: Some spells allow you to make a ranged touch attack as part of the casting of the spell. These attacks are made as part of the spell and do not require a separate action. Ranged touch attacks provoke an attack of opportunity, even if the spell that causes the attacks was cast defensively. Unless otherwise noted, ranged touch attacks cannot be held until a later turn (see FAQ below for more information.)
When you cast a spell that allows you to make a ranged touch attack (such as scorching ray), and an enemy is within reach, do you provoke two attacks of opportunity?
Yes, you provoke two attacks of opportunity: one for casting the spell and one for making a ranged attack, since these are two separate events. (Note that at spell that fires multiple simultaneous rays, such as scorching ray, only provokes one AOO for making the ranged attack instead of one AOO for each ranged attack. It still provokes for casting the spell.
Dismiss a Spell
Dismissing an active spell is a standard action that doesn’t provoke attacks of opportunity.
Start/Complete Full-Round Action
The “start full-round action” standard action lets you start undertaking a full-round action, which you can complete in the following round by using another standard action. You can’t use this action to start or complete a full attack, charge, run, or withdraw.
You can defend yourself as a standard action. You get a +4 dodge bonus to your AC for 1 round. Your AC improves at the start of this action. You can’t combine total defense with fighting defensively or with the benefit of the Combat Expertise feat. You can’t make attacks of opportunity while using total defense.
Use Special Ability
Using a special ability is usually a standard action, but whether it is a standard action, a full-round action, or not an action at all is defined by the ability.
Spell-Like Abilities (Sp)
Using a spell-like ability works like casting a spell in that it requires concentration and provokes attacks of opportunity. Spell-like abilities can be disrupted. If your concentration is broken, the attempt to use the ability fails, but the attempt counts as if you had used the ability. The casting time of a spell-like ability is 1 standard action, unless the ability description notes otherwise.
Using a Spell-Like Ability on the Defensive: You may attempt to use a spell-like ability on the defensive, just as with casting a spell. If the concentration check (DC 15 + double the spell’s level) fails, you can’t use the ability, but the attempt counts as if you had used the ability.
Supernatural Abilities (Su)
Using a supernatural ability is usually a standard action (unless defined otherwise by the ability’s description). Its use cannot be disrupted, does not require concentration, and does not provoke attacks of opportunity.
Extraordinary Abilities (Ex)
Using an extraordinary ability is usually not an action because most extraordinary abilities automatically happen in a reactive fashion. Those extraordinary abilities that are actions are usually standard actions that cannot be disrupted, do not require concentration, and do not provoke attacks of opportunity.
With the exception of specific movement-related skills, most move actions don’t require a check.
The simplest move action is moving your speed. If you take this kind of move action during your turn, you can’t also take a 5-foot step.
Many nonstandard modes of movement are covered under this category, including climbing (up to one-quarter of your speed) and swimming (up to one-quarter of your speed).
You can climb at half your speed as a move action by accepting a -5 penalty on your Climb check.
You can crawl 5 feet as a move action. Crawling incurs attacks of opportunity from any attackers who threaten you at any point of your crawl. A crawling character is considered prone and must take a move action to stand up, provoking an attack of opportunity.
Direct or Redirect a Spell
Some spells allow you to redirect the effect to new targets or areas after you cast the spell. Redirecting a spell requires a move action and does not provoke attacks of opportunity or require concentration.
Draw or Sheathe a Weapon
Drawing a weapon so that you can use it in combat, or putting it away so that you have a free hand, requires a move action. This action also applies to weapon-like objects carried in easy reach, such as wands. If your weapon or weapon-like object is stored in a pack or otherwise out of easy reach, treat this action as retrieving a stored item.
If you have a base attack bonus of +1 or higher, you may draw a weapon as a free action combined with a regular move. If you have the Two-Weapon Fighting feat, you can draw two light or one-handed weapons in the time it would normally take you to draw one.
Drawing ammunition for use with a ranged weapon (such as arrows, bolts, sling bullets, or shuriken) is a free action.
Manipulate an Item
Moving or manipulating an item is usually a move action.
This includes retrieving or putting away a stored item, picking up an item, moving a heavy object, and opening a door. Examples of this kind of action, along with whether they incur an attack of opportunity, are given in
Table: Actions in Combat.
Mount/Dismount a Steed
Mounting or dismounting a steed requires a move action.
Fast Mount or Dismount
You can mount or dismount as a free action with a DC 20 Ride check. If you fail the check, mounting or dismounting is a move action instead. You can’t
attempt a fast mount or fast dismount unless you can perform the mount or dismount as a move action in the current round.
Ready or Drop a Shield
Strapping a shield to your arm to gain its shield bonus to your AC, or unstrapping and dropping a shield so you can use your shield hand for another purpose, requires a move action. If you have a base attack bonus of +1 or higher, you can ready or drop a shield as a free action combined with a regular move.
Dropping a carried (but not worn) shield is a free action.
Standing up from a prone position requires a move action and provokes attacks of opportunity.
A full-round action requires an entire round to complete. Thus, it can’t be coupled with a standard or a move action, though if it does not involve moving any distance, you can take a 5-foot step.
Editor’s Note: Replacing Attacks with Combat Maneuvers
Any combination of a creature’s attacks during a melee full attack can be replaced by a trip, disarm, or sunder maneuver (any maneuver that says “in place of a melee attack”). When doing this, the calculation for the creature’s Combat Maneuver Bonus uses the base attack bonus of the attack that was exchanged for a combat maneuver. For example, a creature with a BAB of +6/+1 who performs a trip with her second attack uses +1 as her BAB for the CMB of the trip.
Editor’s Note: Multiple Sunder Attempts
Can I make multiple sunder attempts in one round as part of a full-attack action? The sunder text says that I can make sunder attempts in place of melee attacks in an attack action, which is not technically a full-attack action.
Yes you can. The text is a little unclear here. Instead of saying “as part of an attack action in place of a melee attack”, the text should read “in place of a melee attack”, which would allow you to make multiple attempts in one round, or even make a sunder attempt as an attack of opportunity.
If you get more than one attack per round because your base attack bonus is high enough (see Base Attack Bonus in Classes), because you fight with two weapons or a double weapon, or for some special reason, you must use a full-round action to get your additional attacks. You do not need to specify the targets of your attacks ahead of time. You can see how the earlier attacks turn out before assigning the later ones.
The only movement you can take during a full attack is a 5-foot step. You may take the step before, after, or between your attacks.
If you get multiple attacks because your base attack bonus is high enough, you must make the attacks in order from highest bonus to lowest. If you are using two weapons, you can strike with either weapon first. If you are using a double weapon, you can strike with either part of the weapon first.
Deciding between an Attack or a Full Attack
After your first attack, you can decide to take a move action instead of making your remaining attacks, depending on how the first attack turns out and assuming you have not already taken a move action this round. If you’ve already taken a 5-foot step, you can’t use your move action to move any distance, but you could still use a different kind of move action.
Fighting Defensively as a Full-Round Action
You can choose to fight defensively when taking a full-attack action. If you do so, you take a -4 penalty on all attacks in a round to gain a +2 dodge bonus to AC until the start of your next turn.
Cast a Spell
A spell that takes one round to cast is a full-round action. It comes into effect just before the beginning of your turn in the round after you began casting the spell. You then act normally after the spell is completed.
A spell that takes 1 minute to cast comes into effect just before your turn 1 minute later (and for each of those 10 rounds, you are casting a spell as a full-round action). These actions
must be consecutive and uninterrupted, or the spell automatically fails.
When you begin a spell that takes 1 round or longer to cast, you must continue the invocations, gestures, and concentration from 1 round to just before your turn in the next round (at least). If you lose concentration after starting the spell and before it is complete, you lose the spell.
You only provoke attacks of opportunity when you begin casting a spell, even though you might continue casting for at least 1 full round. While casting a spell, you don’t threaten any squares around you.
This action is otherwise identical to the cast a spell action described under Standard Actions.
Casting a Metamagic Spell
Sorcerers and bards must take more time to cast a metamagic spell (one enhanced by a metamagic feat) than a regular spell. If a spell’s normal casting time is 1 standard action, casting a metamagic version of the spell is a full-round action for a sorcerer or bard (except for spells modified by the Quicken Spell feat, which take 1 swift action to cast). Note that this isn’t the same as a spell with a 1-round casting time. Spells that take a full-round action to cast take effect in the same round that you begin casting, and you are not required to continue the invocations, gestures, and concentration until your next turn. For spells with a longer casting time, it takes an extra full-round action to cast the metamagic spell.
Clerics and druids must take more time to spontaneously cast a metamagic version of a cure, inflict, or summon spell. Spontaneously casting a metamagic version of a spell with a casting time of 1 standard action is a full-round action, and spells with longer casting times take an extra full-round action to cast.
Move 5 Feet through Difficult Terrain
In some situations, your movement may be so hampered that you don’t have sufficient speed even to move 5 feet (a single square). In such a case, you may spend a full-round action to move 5 feet (1 square) in any direction, even diagonally. Even though this looks like a 5-foot step, it’s not, and thus it provokes attacks of opportunity normally.
You can run as a full-round action. If you do, you do not also get a 5-foot step. When you run, you can move up to four times your speed in a straight line (or three times your speed if you’re in heavy armor). You lose any Dexterity bonus to AC unless you have the Run feat.
You can run for a number of rounds equal to your Constitution score, but after that you must make a DC 10 Constitution check to continue running. You must check again each round in which you continue to run, and the DC of this check increases by 1 for each check you have made. When you fail this check, you must stop running. A character who has run to his limit must rest for 1 minute (10 rounds) before running again. During a rest period, a character can move no faster than a normal move action.
You can’t run across difficult terrain or if you can’t see where you’re going.
A run represents a speed of about 13 miles per hour for an unencumbered human.
Use Special Ability
Using a special ability is usually a standard action, but some may be full-round actions, as defined by the ability.
Withdrawing from melee combat is a full-round action. When you withdraw, you can move up to double your speed. The square you start out in is not considered threatened by any opponent you can see, and therefore visible enemies do not get attacks of opportunity against you when you move from that square. Invisible enemies still get attacks of opportunity against you, and you can’t withdraw from combat if you’re blinded.
You can’t take a 5-foot step during the same round in which you withdraw.
If, during the process
of withdrawing, you move out of a threatened square (other than the one you
started in), enemies get attacks of opportunity as normal.
You may not withdraw using
a form of movement for which you don’t have a listed speed.
Note that despite the name of this action, you don’t actually have to leave combat entirely.
If you are limited to taking only a standard action each round you can withdraw as a standard action. In this case, you may move up to your speed.
Free actions don’t take any time at all, though there may be limits to the number of free actions you can perform in a turn. Free actions rarely incur attacks of opportunity. Some common free actions are described below.
Cease concentration on Spell
You can stop concentrating on a spell as a free action.
Drop an Item
Dropping an item in your space or into an adjacent square is a free action.
Dropping to a prone position in your space is a free action.
In general, speaking is a free action that you can perform even when it isn’t your turn. Speaking more than a few sentences is generally beyond the limit of a free action.
A swift action consumes a very small amount of time, but represents a larger expenditure of effort than a free action. You can perform one swift action per turn without affecting your ability to perform other actions. In that regard, a swift action is like a free action. You can, however, perform only one single swift action per turn, regardless of what other actions you take. You can take a swift action anytime you would normally be allowed to take a free action. Swift actions usually involve spellcasting, activating a feat, or the activation of magic items.
Cast a quickened Spell
You can cast a quickened spell (see the Quicken Spell metamagic feat), or any spell whose casting time is designated as a free or swift action, as a swift action. Only one such spell can be cast in any round, and such spells don’t count toward your normal limit of one spell per round. Casting a spell as a swift action doesn’t incur an attack of opportunity.
Much like a swift action, an immediate action consumes a very small amount of time but represents a larger expenditure of effort and energy than a free action. However, unlike a swift action, an immediate action can be performed at any time – even if it’s not your turn. Casting feather fall is an immediate action, since the spell can be cast at any time.
Using an immediate action on your turn is the same as using a swift action and counts as your swift action for that turn. You cannot use another immediate action or a swift action until after your next turn if you have used an immediate action when it is not currently your turn (effectively, using an immediate action before your turn is equivalent to using your swift action for the coming turn). You also cannot use an immediate action if you are flat-footed.
The following actions take a variable amount of time to accomplish or otherwise work differently than other actions.
Take 5-Foot Step
You can move 5 feet in any round when you don’t perform any other kind of movement. Taking this 5-foot step never provokes an attack of opportunity. You can’t take more than one 5-foot step in a round, and you can’t take a 5-foot step in the same round that you move any distance.
You can take a 5-foot step before, during, or after your other actions in the round.
You can only take a 5-foot-step if your movement isn’t hampered by difficult terrain or darkness. Any creature with a speed of 5 feet or less can’t take a 5-foot step, since moving even 5 feet requires a move action for such a slow creature.
You may not take a 5-foot step using a form of movement for which you do not have a listed speed.
Certain feats let you take special actions in combat. Other feats do not require actions themselves, but they give you a bonus when attempting something you can already do. Some feats are not meant to be used within the framework of combat. The individual feat descriptions tell you what you need to know about them.
Most skill uses are standard actions, but some might be move actions, full-round actions, free actions, or something else entirely.
The individual skill descriptions in Using Skills tell you what sorts of actions are required to perform skills.
Injury and Death
Massive Damage (Optional Rule)
If you ever sustain a single attack that deals an amount of damage equal to half your total hit points (minimum 50 points of damage) or more and it doesn’t kill you outright, you must make a DC 15 Fortitude save. If this saving throw fails, you die regardless of your current hit points. If you take half your total hit points or more in damage from multiple attacks, no one of which dealt more than half your total hit points (minimum 50), the massive damage rule does not apply.
Scars and Wounds (Optional Rule)
Source Skull & Shackles Player’s Guide
This optional rules system gives GMs a way to assign scars and major wounds to PCs. Before implementing this system, consider these rules carefully. Major wounds can have major effects upon play, and some groups may not appreciate such debilitations, preferring the threat of death and an unscarred resurrection over a thematic crippling.
These rules are a variation on the optional massive damage rule.
Whenever a character takes damage equivalent to massive damage, he must make a successful DC 15 Fortitude save or be reduced to -1 hit points and gain a permanent debilitating scar or handicap. These effects are randomly determined by rolling 1d20 on the table below. Effects are permanent and cumulative, though the GM should reroll results that seem too crippling or don’t make sense ‘ such as a character losing a hand two or three times. The regenerate spell heals scars and restores lost limbs, removing both positive and negative effects.
|d20||Battle Scar or Amputation|
|1-5||Minor scar – interesting but otherwise cosmetic|
|6-8||Moderate scar – cut on face (+1 bonus on Charisma-based skill checks for first scar only, consider subsequent cuts as a major scar)|
|9-10||Major scar – severe cut on face (-1 penalty on Charisma-based skill checks**)|
|11-14||Loss of finger (for every 3 fingers lost, -1 Dexterity)|
|15-16||Impressive wound (-1 Constitution)|
|17||Loss of eye (-4 penalty on all sight-based Perception checks)|
|18||Loss of leg (speed reduced to half, cannot charge)|
|19||Loss of hand (cannot use two-handed items*)|
|20||Loss of arm (-1 Strength, cannot use two-handed items*)|
|* Losing a single hand or arm does not affect a spellcaster’s ability to cast spells with somatic components. |
** At the GM’s discretion, characters with major scars may also be granted
Your hit points measure how hard you are to kill. No matter how many hit points you lose, your character isn’t hindered in any way until your hit points drop to 0 or lower.
Loss of Hit Points
The most common way that your character gets hurt is to take lethal damage and lose hit points.
What Hit Points Represent
Hit points mean two things in the game world: the ability to take physical punishment and keep going, and the ability to turn a serious blow into a less serious one.
Effects of Hit Point Damage
Damage doesn’t slow you down until your current hit points reach 0 or lower. At 0 hit points, you’re disabled.
If your hit point total is negative, but not equal to or greater than your Constitution score, you are unconscious and dying.
When your negative hit point total is equal to your Constitution, you’re dead.
Disabled (0 Hit Points)
When your current hit point total drops to exactly 0, you are disabled.
You gain the staggered condition and can only take a single move or standard action each turn (but not both, nor can you take full-round actions). You can take move actions without further injuring yourself, but if you perform any standard action (or any other strenuous action) you take 1 point of damage after completing the act. Unless your activity increased your hit points, you are now at -1 hit points and dying.
Healing that raises your hit points above 0 makes you fully functional again, just as if you’d never been reduced to 0 or fewer hit points.
You can also become disabled when recovering from dying. In this case, it’s a step toward recovery, and you can have fewer than 0 hit points (see Stable Characters and Recovery).
Dying (Negative Hit Points)
If your hit point total is negative, but not equal to or greater than your Constitution score, you’re dying.
A dying character immediately falls unconscious and can take no actions.
A dying character loses 1 hit point every round. This continues until the character dies or becomes stable.
When your character’s current hit points drop to a negative amount equal to his Constitution score or lower, or if he succumbs to massive damage, he’s dead. A character can also die from taking ability damage or suffering an ability drain that reduces his Constitution score to 0 (see Special Abilities).
Certain types of powerful magic, such as raise dead and resurrection, can restore life to a dead character.
Stable Characters and Recovery
On the character’s next turn, after being reduced to negative hit points (but not dead), and on all subsequent turns, the character must make a DC 10 Constitution check to become stable. The character takes a penalty on this roll equal to his negative hit point total. A character that is stable does not need to make this check. A natural 20 on this check is an automatic success. If the character fails this check, he loses 1 hit point. An unconscious or dying character cannot use any special action that changes the initiative count on which his action occurs.
Characters taking continuous damage, such as from an acid arrow or a bleed effect, automatically fail all Constitution checks made to stabilize.
Such characters lose 1 hit point per round in addition to the continuous damage.
You can keep a dying character from losing any more hit points and make him stable with a DC 15 Heal check.
If any sort of healing cures the dying character of even 1 point of damage, he becomes stable and stops losing hit points.
Healing that raises the dying character’s hit points to 0 makes him conscious and disabled. Healing that raises his hit points to 1 or more makes him fully functional again, just as if he’d never been reduced to 0 or lower. A spellcaster retains the spellcasting capability she had before dropping below 0 hit points.
A stable character who has been tended by a healer or who has been magically healed eventually regains consciousness and recovers hit points naturally. If the character has no one to tend him, however, his life is still in danger, and he may yet slip away.
Recovering with Help
One hour after a tended, dying character becomes stable, the character must make a DC 10 Constitution check to become conscious. The character takes a penalty on this roll equal to his negative hit point total. Conscious characters with negative hit point totals are treated as disabled characters. If the character remains unconscious, he receives another check every hour to regain consciousness. A natural 20 on this check is an automatic success. Even if unconscious, the character recovers hit points naturally. He automatically regains consciousness when his hit points rise to 1 or higher.
Recovering without Help
A severely wounded character left alone usually dies. He has a small chance of recovering on his own. Treat such characters as those attempting to recover with help, but every failed Constitution check to regain consciousness results in the loss of 1 hit point. An unaided character does not recover hit points naturally. Once conscious, the character can make a DC 10 Constitution check once per day, after resting for 8 hours, to begin recovering hit points naturally. The character takes a penalty on this roll equal to his negative hit point total. Failing this check causes the character to lose 1 hit point, but this does not cause the character to become unconscious. Once a character makes this check, he continues to heal naturally and is no longer in danger of losing hit points naturally.
After taking damage, you can recover hit points through natural healing or through magical healing. In any case, you can’t regain hit points past your full normal hit point total.
With a full night’s rest (8 hours of sleep or more), you recover 1 hit point per character level. Any significant interruption during your rest prevents you from healing that night.
If you undergo complete
bed rest for an entire day and night, you recover twice your character level
in hit points.
Various abilities and spells
can restore hit points.
You can never recover more
hit points than you lost. Magical healing won’t raise your current hit points
higher than your full normal hit point total.
Healing Ability Damage
Temporary ability damage returns at the rate of 1 point per night of rest (8 hours) for each affected ability score. Complete bed rest restores 2 points per day (24 hours) for each affected ability score.
Temporary Hit Points*
Do temporary hit point from the same source stack?
No. Generally, effects do not stack if they are from the same source (Core Rulebook page 208, Combining Magical Effects). Although temporary hit points are not a “bonus,” the principle still applies.
This prevents a creature with energy drain (which grants the creature 5 temporary hit points when used) from draining an entire village of 100 people in order to gain 500 temporary hit points before the PCs arrive to fight it.
Temporary hit points
Certain effects give a character temporary hit points. These hit points are in addition to the character’s current hit point total and any damage taken by the character is subtracted from these hit points first. Any damage in excess of a character’s temporary hit points is applied to his current hit points as normal. If the effect that grants the temporary hit points ends or is dispelled, any remaining temporary hit points go away. The damage they sustained is not transferred to the character’s current hit points.
When temporary hit points are lost, they cannot be restored as real hit points can be, even by magic.
Increases in Constitution Score and Current Hit Points
An increase in a character’s Constitution score, even a temporary one, can give her more hit points (an effective hit point increase), but these are not temporary hit points. They can be restored, and they are not lost first as temporary hit points are.
Nonlethal damage represents harm to a character that is not life-threatening. Unlike normal damage, nonlethal damage is healed quickly with rest.
Dealing Nonlethal Damage
Certain attacks deal nonlethal damage. Other effects, such as heat or being exhausted, also deal nonlethal damage. When you take nonlethal damage, keep a running total of how much you’ve accumulated. Do not deduct the nonlethal damage number from your current hit points. It is not “real” damage. Instead, when your nonlethal damage equals your current hit points, you’re staggered (see below), and when it exceeds your current hit points, you fall unconscious.
Nonlethal Damage with a Weapon that Deals Lethal Damage
You can use a melee weapon that deals lethal damage to deal nonlethal damage instead, but you take a -4 penalty on your attack roll.
Lethal Damage with a Weapon that Deals Nonlethal Damage
You can use a weapon that deals nonlethal damage, including an unarmed strike, to deal lethal damage instead, but you take a -4 penalty on your attack roll.
Staggered and Unconscious
When your nonlethal damage equals your current hit points, you’re staggered. You can only take a standard action or a move action in each round (in addition to free, immediate, and swift actions). You cease being staggered when your current hit points once again exceed your nonlethal damage.
When your nonlethal damage exceeds your current hit points, you fall unconscious. While unconscious, you are helpless.
Spellcasters who fall unconscious retain any spellcasting ability they had before going unconscious.
If a creature’s nonlethal damage is equal to his total maximum hit points (not his current hit points), all further nonlethal damage is treated as lethal damage. This does not apply to creatures with regeneration. Such creatures simply accrue additional nonlethal damage, increasing the amount of time they remain unconscious.
Healing Nonlethal Damage
You heal nonlethal damage at the rate of 1 hit point per hour per character level. When a spell or ability cures hit point damage, it also removes an equal amount of nonlethal damage.
Movement, Position, And Distance
Miniatures are on the 30mm scale’ a miniature of a 6-foot-tall man is approximately 30mm tall. A square on the battle grid is 1 inch across, representing a 5-foot-by-5-foot area.
Table: Tactical Speed Race No Armor or Light Armor Medium or Heavy Armor
Human, elf, half-elf, half-orc 30 ft. (6 squares) 20 ft. (4 squares)
Dwarf 20 ft. (4 squares) 20 ft. (4 squares)
Halfling, gnome 20 ft. (4 squares) 15 ft. (3 squares)
Tactical Movement Example
[Image created by Marcus Lake and used by d20pfsrd.com by permission. No commercial
reproductions of this image are permitted.]
Image created by Marcus Lake and used by d20pfsrd.com by permission. No commercial
reproductions of this image are permitted.
The fighter’s first move costs him 5 feet (or 1 square). His next costs 5 feet also, but his third (his 2nd diagonal) costs him 10 feet. Next he moves into difficult terrain, also costing him 10 feet. At this point (#6), the fighter has moved 30 feetone move action. The last square is a diagonal move in difficult terrain, which
costs 15 feet; he must spend his turn’s standard action to move this far.
The Large ogre’s move costs a total of 20 feet worth of movement (or 4 squares). The ogre cannot cut across the corner to get to that location, and must fully move around it, as indicated.
Your speed is determined by your race and your armor (see Table: Tactical Speed). Your speed while unarmored is your base land speed.
A character encumbered by carrying treasure. a large amount of gear, or fallen comrades may move slower than normal (see Additional Rules).
Difficult terrain, obstacles, or poor visibility can hamper movement.
Movement in Combat
Generally, you can move your speed in a round and still do something (take a move action and a standard action).
If you do nothing but move (that is, if you use both of your actions in a round to move your speed), you can move double your speed.
If you spend the entire round running, you can move quadruple your speed (or three times your speed in heavy armor). If you do something that requires a full round, you can only take a 5-foot step.
Bonuses to Speed
A barbarian has a +10-foot bonus to his speed (unless she’s wearing heavy armor). Experienced monks also have higher speed (unless they’re wearing armor of any sort). In addition, many spells and magic items can affect a character’s speed. Always apply any modifiers to a character’s speed before adjusting the character’s speed based on armor or encumbrance,
and remember that multiple bonuses of the same type to a character’s speed don’t
As a general rule, distance
is measured assuming that 1 square equals 5 feet.
When measuring distance,
the first diagonal counts as 1 square, the second counts as 2 squares, the third
counts as 1, the fourth as 2, and so on.
You can’t move diagonally past a corner (even by taking a 5-foot step). You can move diagonally past a creature, even an opponent.
You can also move diagonally past other impassable obstacles, such as pits.
When it’s important to determine the closest square or creature to a location, if two squares or creatures are equally close, randomly determine which one counts as closest by rolling a die.
Moving Through a Square
You can move through an unoccupied square without difficulty in most circumstances. Difficult terrain and a number of spell effects might hamper your movement through open spaces.
You can move through a square occupied by a friendly character, unless you are charging. When you move through a square occupied by a friendly character, that character doesn’t provide you with cover.
You can’t move through a square occupied by an opponent unless the opponent is helpless. You can move through a square occupied by a helpless opponent without penalty. Some creatures, particularly very large ones, may present an obstacle even when helpless. In such cases, each square you move through counts as 2 squares.
Ending Your Movement
You can’t end your movement in the same square as another creature unless it is helpless.
During your movement, you can attempt to move through a square occupied by an opponent (see Overrun).
Very Small Creature
A Fine, Diminutive, or
Tiny creature can move into or through an occupied square. The creature provokes
attacks of opportunity when doing so.
Square Occupied by Creature Three Sizes Larger or Smaller
Any creature can move through
a square occupied by a creature three size categories larger than itself.
A big creature can move
through a square occupied by a creature three size categories smaller than it
is. Creatures moving through squares occupied by other creatures provoke attacks
of opportunity from those creatures.
Some creatures break the
above rules. A creature that completely fills the squares it occupies cannot
be moved past, even with the Acrobatics skill or similar special abilities.
Terrain and Obstacles
From tangled plants to
broken stone, there are a number of terrain features that can affect your movement.
Difficult terrain, such
as heavy undergrowth, broken ground, or steep stairs, hampers movement. Each
square of difficult terrain counts as 2 squares of movement. Each diagonal move
into a difficult terrain square counts as 3 squares. You can’t run or charge
across difficult terrain.
If you occupy squares with different kinds of terrain, you can move only as fast as the most difficult terrain you occupy will allow.
Flying and incorporeal creatures are not hampered by difficult terrain.
Like difficult terrain, obstacles can hamper movement. If an obstacle hampers movement but doesn’t completely block it, each obstructed square or obstacle between squares counts as 2 squares of movement. You must pay this cost to cross the obstacle, in addition to the cost to move into the square on the other side. If you don’t have sufficient movement to cross the obstacle and move into the square on the other side, you can’t cross it. Some obstacles may also require a skill check to cross.
On the other hand, some obstacles block movement entirely. A character can’t move through a blocking obstacle.
Flying and incorporeal creatures are able to avoid most obstacles.
In some cases, you may have to squeeze into or through an area that isn’t as wide as the space you take up. You can squeeze through or into a space that is at least half as wide as your normal space. Each move into or through a narrow space counts as if it were 2 squares, and while squeezed in a narrow space, you take a -4 penalty on attack rolls and a -4 penalty to AC.
When a Large creature (which normally takes up 4 squares) squeezes into a space that’s 1 square wide, the creature’s miniature figure occupies 2 squares, centered on the line between the 2 squares. For a bigger creature, center the creature likewise in the area it squeezes into.
A creature can squeeze
past a creature while moving but it can’t end its movement in an occupied square.
To squeeze through or into
a space less than half your space’s width, you must use the Escape Artist skill.
You can’t attack while using Escape Artist to squeeze through or into a narrow
space, you take a 4 penalty to AC, and you lose any Dexterity
bonus to AC.
Special Movement Rules
These rules cover special
Accidentally Ending Movement in an Illegal Space
Sometimes a character ends
its movement while moving through a space where it’s not allowed to stop. When
that happens, put your miniature in the last legal position you occupied, or
the closest legal position, if there’s a legal position that’s closer.
Double Movement Cost
When your movement is hampered in some way, your movement usually costs double. For example, each square of movement through difficult terrain counts as 2 squares, and each diagonal move through such terrain counts as 3 squares (just as two diagonal moves normally do).
If movement cost is doubled twice, then each square counts as 4 squares (or as 6 squares if moving diagonally). If movement cost is doubled three times, then each square counts as 8 squares (12 if diagonal) and so on. This is an exception to the general rule that two doublings are equivalent to a tripling.
Despite whatever penalties to movement you might have, you can take a full-round action to move 5 feet (1 square) in any direction, even diagonally. This rule doesn’t allow you to move through impassable terrain or to move when all movement is prohibited. Such movement provokes attacks of opportunity as normal (despite the distance covered, this move isn’t a 5-foot step).
Big And Little Creatures In Combat
Creatures smaller than Small or larger than Medium have special rules relating to position.
Table: Creature Size and Scale Creature Size Space Natural Reach*
Fine 1/2 ft. 0
Diminutive 1 ft. 0
Tiny 2-1/2 ft. 0
Small 5 ft. 5 ft.
Medium 5 ft. 5 ft.
Large (tall) 10 ft. 10 ft.
Large (long) 10 ft. 5 ft.
Huge (tall) 15 ft. 15 ft.
Huge (long) 15 ft. 10 ft.
Gargantuan (tall) 20 ft. 20 ft.
Gargantuan (long) 20 ft. 15 ft.
Colossal (tall) 30 ft. 30 ft.
Colossal (long) 30 ft. 20 ft.
* These values are typical for creatures of the indicated size. Some exceptions
Tiny, Diminutive, and Fine Creatures
Very small creatures take
up less than 1 square of space. This means that more than one such creature
can fit into a single square. A Tiny creature typically occupies a space only
2-1/2 feet across, so four can fit into a single square. 25 Diminutive creatures
or 100 Fine creatures can fit into a single square. Creatures that take up less
than 1 square of space typically have a natural reach of 0 feet, meaning they
can’t reach into adjacent squares. They must enter an opponent’s square to attack
in melee. This provokes an attack of opportunity from the opponent. You can
attack into your own square if you need to, so you can attack such creatures
normally. Since they have no natural reach, they do not threaten the squares
around them. You can move past them without provoking attacks of opportunity.
They also can’t flank an enemy.
Large, Huge, Gargantuan, and Colossal Creatures
Very large creatures take
up more than 1 square.
Creatures that take up
more than 1 square typically have a natural reach of 10 feet or more, meaning
that they can reach targets even if they aren’t in adjacent squares.
Unlike when someone uses
a reach weapon, a creature with greater than normal natural reach (more than
5 feet) still threatens squares adjacent to it. A creature with greater than
normal natural reach usually gets an attack of opportunity against you if you
approach it, because you must enter and move within the range of its reach before
you can attack it. This attack of opportunity is not provoked if you take a
Large or larger creatures
using reach weapons can strike up to double their natural reach but can’t strike
at their natural reach or less.
A number of factors and
conditions can influence an attack roll. Many of these situations grant a bonus
or penalty on attack rolls or to a defender’s Armor Class.
|Concealed or invisible|
|Grappling (but attacker|
|Kneeling or sitting||2 +2|
defender loses any Dexterity
bonus to AC.
2 An entangled character takes a 4 penalty to Dexterity.
3 The defender is denied its Dexterity
Attack Roll Modifiers
|On higher ground||+1||+0|
|Shaken or frightened||2||2|
|1 An entangled|
character also takes a 4 penalty to Dexterity,
which may affect his attack roll.
2 The defender loses any Dexterity
3 Most ranged weapons can’t be used while the attacker is prone, but you
[Image created by Marcus Lake and used by d20pfsrd.com by permission. No commercial
reproductions of this image are permitted.]
Image created by Marcus Lake and used by d20pfsrd.com by permission. No commercial
reproductions of this image are permitted.
#1: The fighter is adjacent
to the ogre, and nothing blocks him from reaching it. The ogre does not have
cover against the fighter.
#2: The rogue is adjacent
to the ogre, but lines from the corners of her square to the corners of the
ogre’s square cross through a wall. The ogre has melee cover from her, but if
it attacks her, the rogue does not have cover from it, as the ogre has reach
(so it figures attacks as if attacking with a ranged weapon).
#3: The cleric attacks
at range, and must pick one of the corners of her square to determine cover.
Some of these lines pass through a solid surface, meaning that the ogre has
#4: The sorcerer attacks
at range as well, but her lines reveal that she can clearly see more than half
of the ogre. This gives the ogre partial cover.
To determine whether your
target has cover from your ranged attack, choose a corner of your square. If
any line from this corner to any corner of the target’s square passes through
a square or border that blocks line of effect or provides cover, or through
a square occupied by a creature, the target has cover (+4 to AC).
When making a melee attack against an adjacent target, your target has cover if any line from any corner of your square to the target’s square goes through a wall (including a low wall). When making a melee attack against a target that isn’t adjacent to you (such as with a reach weapon), use the rules for determining cover from ranged attacks.
Low Obstacles and Cover
A low obstacle (such as a wall no higher than half your height) provides cover, but only to creatures within 30 feet (6 squares) of it. The attacker can ignore the cover if he’s closer to the obstacle than his target.
Cover and Attacks of Opportunity
You can’t execute an attack of opportunity against an opponent with cover relative to you.
Cover and Reflex Saves
Cover grants you a +2 bonus on Reflex saves against attacks that originate or burst out from a point on the other side of the cover from you. Note that spread effects can extend around corners and thus negate this cover bonus.
Cover and Stealth Checks
You can use cover to make a Stealth check. Without cover, you usually need concealment (see below) to make a Stealth check.
Creatures, even your enemies,
can provide you with cover against ranged attacks, giving you a +4 bonus to
AC. However, such soft cover provides no bonus on Reflex saves, nor does soft
cover allow you to make a Stealth check.
Big Creatures and Cover
Any creature with a space
larger than 5 feet (1 square) determines cover against melee attacks slightly
differently than smaller creatures do. Such a creature can choose any square
that it occupies to determine if an opponent has cover against its melee attacks.
Similarly, when making a melee attack against such a creature, you can pick
any of the squares it occupies to determine if it has cover against you.
If a creature has cover,
but more than half the creature is visible, its cover bonus is reduced to a
+2 to AC and a +1 bonus on Reflex saving throws. This partial cover is subject
to the GM’s discretion.
If you don’t have line
of effect to your target (that is, you cannot draw any line from your square
to your target’s square without crossing a solid barrier), he is considered
to have total cover from you. You can’t make an attack against a target that
has total cover.
In some cases, such as
attacking a target hiding behind an arrowslit, cover may provide a greater bonus
to AC and Reflex saves. In such situations, the normal cover bonuses to AC and
Reflex saves can be doubled (to +8 and +4, respectively). A creature with this
improved cover effectively gains improved evasion against any attack to which
the Reflex save bonus applies. Furthermore, improved cover provides a +10 bonus
on Stealth checks.
To determine whether your
target has concealment from your ranged attack, choose a corner of your square.
If any line from this corner to any corner of the target’s square passes through
a square or border that provides concealment, the target has concealment.
When making a melee attack
against an adjacent target, your target has concealment if his space is entirely
within an effect that grants concealment. When making a melee attack against
a target that isn’t adjacent to you, use the rules for determining concealment
from ranged attacks.
In addition, some magical
effects provide concealment against all attacks, regardless of whether any intervening
Concealment Miss Chance
Concealment gives the subject
of a successful attack a 20% chance that the attacker missed because of the
concealment. Make the attack normallyif the attacker hits, the defender
must make a miss chance d% roll to avoid being struck. Multiple concealment
conditions do not stack.
Concealment and Stealth Checks
You can use concealment
to make a Stealth check. Without concealment, you usually need cover to make
a Stealth check.
If you have line of effect
to a target but not line of sight, he is considered to have total concealment
from you. You can’t attack an opponent that has total concealment, though you
can attack into a square that you think he occupies. A successful attack into
a square occupied by an enemy with total concealment has a 50% miss chance (instead
of the normal 20% miss chance for an opponent with concealment).
You can’t execute an attack
of opportunity against an opponent with total concealment, even if you know
what square or squares the opponent occupies.
Concealment isn’t always
effective. An area of dim lighting or darkness doesn’t provide any concealment
against an opponent with Darkvision. Characters with Low-Light
Vision can see
clearly for a greater distance than other characters with the same light source.
Although invisibility provides total concealment, sighted opponents may still
make Perception checks to notice the location of an invisible character. An
invisible character gains a +20 bonus on Stealth checks if moving, or a +40
bonus on Stealth checks when not moving (even though opponents can’t see you,
they might be able to figure out where you are from other visual or auditory
Varying Degrees of Concealment
Certain situations may
provide more or less than typical concealment, and modify the miss chance accordingly.
[Image created by Marcus Lake and used by d20pfsrd.com by permission. No commercial
reproductions of this image are permitted.]
Image created by Marcus Lake and used by d20pfsrd.com by permission. No commercial
reproductions of this image are permitted.
#1: The fighter and the
cleric are flanking the ogre because they can draw a line to each other that
passes through opposite sides of the ogre. Both the fighter and the cleric receive
a +2 bonus on attack rolls made against the ogre.
#2: The rogue is not flanking
the ogre because she cannot draw a line to the fighter or the cleric that passes
through opposite sides of the ogre. The rogue cannot draw a line to the sorcerer
because the sorcerer is not adjacent to the ogre and does not threaten it.
#3: The goblin and the
ogre flank the sorcerer, as they can draw a line between them that passes through
opposite sides of the sorcerer’s square. If the ogre didn’t have reach to the
sorcerer, though, he and the goblin would not be flanking her.
When making a melee attack,
you get a +2 flanking bonus if your opponent is threatened by another enemy
character or creature on its opposite border or opposite corner.
When in doubt about whether
two characters flank an opponent in the middle, trace an imaginary line between
the two attackers’ centers. If the line passes through opposite borders of the
opponent’s space (including corners of those borders), then the opponent is
Exception: If a flanker
takes up more than 1 square, it gets the flanking bonus if any square it occupies
counts for flanking.
Only a creature or character that threatens the defender can help an attacker get a flanking bonus.
Creatures with a reach of 0 feet can’t flank an opponent.
A helpless opponent is someone who is bound, sleeping, paralyzed, unconscious, or otherwise at your mercy.
A helpless character takes a -4 penalty to AC against melee attacks. In addition, a helpless character is treated as having a Dexterity of 0, giving him a -5 penalty to AC against both melee and ranged attacks (for a total of -9 against melee and -5 against ranged). A helpless character is also flat-footed.
Coup de Grace
As a full-round action, you can use a melee weapon to deliver a coup de grace (pronounced “coo day grahs”) to a helpless opponent. You can also use a bow or crossbow, provided you are adjacent to the target.
You automatically hit and score a critical hit. If the defender survives the damage, he must make a Fortitude save (DC 10 + damage dealt) or die. A rogue also gets her extra sneak attack damage against a helpless opponent when delivering a coup de grace.
Delivering a coup de grace provokes attacks of opportunity from threatening opponents.
You can’t deliver a coup de grace against a creature that is immune to critical hits. You can deliver a coup de grace against a creature with total concealment, but doing this requires two consecutive full-round actions (one to “find” the creature once you’ve determined what square it’s in, and one to deliver the coup de grace).
This section discusses all of the various standard maneuvers you can perform during combat other than normal attacks, casting spells, or using other class abilities. Some of these special attacks can be made as part of another action (such as an attack) or as a attack of opportunity.
In melee combat, you can help a friend attack or defend by distracting or interfering with an opponent. If you’re in position to make a melee attack on an opponent that is engaging a friend in melee combat, you can attempt to aid your friend as a standard action. You make an attack roll against AC 10. If you succeed, your friend gains either a +2 bonus on his next attack roll against that opponent or a +2 bonus to AC against that opponent’s next attack (your choice), as long as that attack comes before the beginning of your next turn. Multiple characters can aid the same friend, and similar bonuses stack.
You can also use this standard
action to help a friend in other ways, such as when he is affected by a spell,
or to assist another character’s skill check.
Editor’s Note: Charge + Vital Strike?
Can Vital Strike be used on a charge?
No. Vital Strike can only be used as part of an attack action, which is a specific kind of standard action. Charging is a special kind of full-round action that includes the ability to make one melee attack, not one attack action.
Charging is a special full-round action that allows you to move up to twice your speed and attack during the action. Charging, however, carries tight restrictions on how you can move.
Movement During a Charge
You must move before your attack, not after. You must move at least 10 feet (2 squares) and may move up to double your speed directly toward the designated opponent. If you move a distance equal to your speed or less, you can also draw a weapon during a charge attack if your base attack bonus is at least +1.
You must have a clear path toward the opponent, and nothing can hinder your movement (such as difficult terrain or obstacles). You must move to the closest space from which you can attack the opponent. If this space is occupied or otherwise blocked, you can’t charge. If any line from your starting space to the ending space passes through a square that blocks movement, slows movement, or contains a creature (even
an ally), you can’t charge. Helpless creatures don’t stop a charge.
If you don’t have line of sight to the opponent at the start of your turn, you can’t charge that opponent.
You can’t take a 5-foot step in the same round as a charge.
If you are able to take only a standard action on your turn, you can still charge, but you are only allowed to move up to your speed (instead of up to double your speed) and you cannot draw a weapon unless you possess the Quick Draw feat. You can’t use this option unless you are restricted to taking only a standard action on your turn.
Attacking on a Charge
After moving, you may make a single melee attack. You get a +2 bonus on the attack roll and take a -2 penalty to your AC until the start of your next turn.
A charging character gets a +2 bonus on combat maneuver attack rolls made to bull rush an opponent.
Even if you have extra attacks, such as from having a high enough base attack bonus or from using multiple weapons, you only get to make one attack during a charge.
Lances and Charge Attacks: A lance deals double damage if employed by a mounted character in a charge.
Weapons Readied against a Charge: Spears, tridents, and other weapons with the brace feature deal double damage when readied (set) and used against a charging character.
During combat, you can attempt to perform a number of maneuvers that can hinder or even cripple your foe, including bull rush, disarm, grapple, overrun, sunder, and trip. Although these maneuvers have vastly different results, they all use a similar mechanic to determine success.
Combat Maneuver Bonus
Each character and creature has a Combat Maneuver Bonus (or CMB) that represents its skill at performing combat maneuvers. A creature’s CMB is determined using the following formula:
CMB = Base attack bonus + Strength modifier + special size modifier
Special Size Modifier
Creatures that are size Tiny or smaller use their Dexterity modifier in place of their Strength modifier to determine their CMB. The special size modifier for a creature’s Combat Maneuver Bonus is as follows:
Fine -8, Diminutive -4, Tiny -2, Small -1, Medium +0, Large +1, Huge +2, Gargantuan+4, Colossal +8.
Some feats and abilities grant a bonus to your CMB when performing specific maneuvers.
Performing a Combat Maneuver
When performing a combat maneuver, you must use an action appropriate to the maneuver you are attempting to perform. While many combat maneuvers can be performed as part of an attack action, full-attack action, or attack of opportunity (in place of a melee attack), others require a specific action. Unless otherwise noted, performing a combat maneuver provokes an attack of opportunity from the target of the maneuver. If you are hit by the target, you take the damage normally and apply that amount as a penalty to the attack roll to perform the maneuver. If your target is immobilized, unconscious, or otherwise incapacitated, your maneuver automatically succeeds (treat as if you rolled a natural 20 on the attack roll). If your target is stunned, you receive a +4 bonus on your attack roll to perform a combat maneuver against it.
When you attempt to perform a combat maneuver, make an attack roll and add your CMB in place of your normal attack bonus. Add any bonuses you currently have on attack rolls due to spells, feats, and other effects. These bonuses must be applicable to the weapon or attack used to perform the maneuver. The DC of this maneuver is your target’s Combat Maneuver Defense. Combat maneuvers are attack rolls, so you must roll for concealment and take any other penalties that would normally apply to an attack roll.
Combat Maneuver Defense
Each character and creature has a Combat Maneuver Defense (or CMD) that represents its ability to resist combat maneuvers. A creature’s CMD is determined using the following formula:
Special Size Modifier
The special size modifier for a creature’s Combat Maneuver Defense is as follows:
Fine -8, Diminutive -4, Tiny -2, Small -1, Medium +0, Large +1, Huge +2, Gargantuan +4, Colossal +8.
Some feats and abilities grant a bonus to your CMD when resisting specific maneuvers.
A creature can also add any circumstance, deflection, dodge, insight, luck, morale, profane, and sacred bonuses to AC to its CMD. Any penalties to a creature’s AC also apply to its CMD. A flat-footed creature does not add its Dexterity bonus to its CMD.
If your attack roll equals or exceeds the CMD of the target, your maneuver is a success and has the listed effect. Some maneuvers, such as bull rush, have varying levels of success depending on how much your attack roll exceeds the target’s CMD. Rolling a natural 20 while attempting a combat maneuver is always a success (except when attempting to escape from bonds), while rolling a natural 1 is always a failure.
You can make a bull rush as a standard action or as part of a charge, in place of the melee attack. You can only bull rush an opponent who is no more than one size category larger than you. A bull rush attempts to push an opponent straight back without doing any harm. If you do not have the Improved Bull Rush feat, or a similar ability, initiating a bull rush provokes an attack of opportunity from the target of your maneuver.
If your attack is successful, your target is pushed back 5 feet. For every 5 by which your attack exceeds your opponent’s CMD you can push the target back an additional 5 feet. You can move with the target if you wish but you must have the available movement to do so. If your attack fails, your movement ends in front of the target.
An enemy being moved by a bull rush does not provoke an attack of opportunity because of the movement unless you possess the Greater Bull
Rush feat. You cannot bull rush a creature into a square that is occupied by a solid object or obstacle. If there is another creature in the way of your
bull rush, you must immediately make a combat maneuver check to bull rush that creature. You take a 4 penalty on this check for each creature being pushed beyond the first. If you are successful, you can continue to push the creatures a distance equal to the lesser result. For example, if a fighter bull rushes a goblin for a total of 15 feet, but there is another goblin 5 feet behind the first, he must make another combat maneuver check against the second goblin after having pushed the first 5 feet. If his check reveals that he can push the second goblin a total of 20 feet, he can continue to push both goblins another 10 feet (since the first goblin will have moved a total of 15 feet).
Source: Advanced Player’s Guide.
You can attempt to hinder a foe in melee as a standard action. This maneuver covers any sort of situational attack that imposes a penalty on a foe for a short period of time. Examples include kicking sand into an opponent’s face to blind him for 1 round, pulling down an enemy’s pants to halve his speed, or hitting a foe in a sensitive spot to make him sickened for a round. The GM is the arbiter of what can be accomplished with this maneuver, but it cannot be used to impose a permanent penalty, and the results can be undone if the target spends a move action. If you do not have the Improved Dirty Trick feat or a similar ability, attempting a dirty trick provokes an attack of opportunity from the target of your maneuver.
If your attack is successful, the target takes a penalty. The penalty is limited to one of the following conditions:
blinded, dazzled, deafened, entangled, shaken, or sickened.
This condition lasts for 1 round. For every 5 by which your attack exceeds your opponent’s CMD, the penalty lasts 1 additional round. This penalty can usually be removed if the target spends a move action. If you possess the Greater Dirty Trick feat, the penalty lasts for 1d4 rounds, plus 1 round for every 5 by which your attack exceeds your opponent’s CMD. In addition, removing the condition requires
the target to spend a standard action.
Editor’s Note: Disarm special feature required to Disarm?
If you want to make a disarm combat maneuver, do you have to use a weapon with the disarm special feature?
No. You don’t have to use a weapon with the disarm special feature (a.k.a. a “disarm weapon”) when making a disarm combat maneuver–you can use any weapon.
You can attempt to disarm your opponent in place of a melee attack. If you do not have the Improved Disarm feat, or a similar ability, attempting to disarm a foe provokes an attack of opportunity from the target of your maneuver. Attempting to disarm a foe while unarmed imposes a -4 penalty on the attack.
If your attack is successful, your target drops one item it is carrying of your choice (even if the item is wielded with two hands). If your attack exceeds the CMD of the target by 10 or more, the target drops the items it is carrying in both hands (maximum two items if the target has more than two hands). If your attack fails by 10 or more, you drop the weapon that you were using to attempt the disarm. If you successfully disarm your opponent without using a weapon, you may automatically pick up the item dropped.
Source: Advanced Player’s Guide.
You can attempt to drag a foe as a standard action. You can only drag an opponent who is no more than one size category larger than you. The aim of this maneuver is to drag a foe in a straight line behind you without doing any harm. If you do not have the Improved Drag feat or a similar ability, initiating a drag provokes an attack of opportunity from the target of your maneuver.
If your attack is successful, both you and your target are moved 5 feet back, with your opponent occupying your original space and you in the space behind that in a straight line. For every 5 by which your attack exceeds your opponent’s CMD, you can drag the target back an additional 5 feet. You must be able to move with the target to perform this maneuver. If you do not have enough movement, the drag goes to the maximum amount of movement available to you and ends.
An enemy being moved by a drag does not provoke an attack of opportunity because of the movement unless you possess the Greater Drag feat. You cannot move a creature into a square that is occupied by a solid object or obstacle. If there is another creature in the way of your movement, the drag ends adjacent to that creature.
Stability Racial Trait: Some characters or types of creatures prove particularly sure-footed, making them more difficult to overthrow and move around the battlefield. Any racial ability that grants a bonus to CMD versus bull rush attempts grants the same bonus against drag combat maneuvers.
Grappling Got You All Tangled Up?
How about some new grapple flowcharts! Click the images below for larger versions. If you see something you believe to be incorrect please let us know!
Flowcharts created by Tom
A creature that is tied
up is “bound” which means it has the Helpless condition. A helpless
target is treated as having a Dexterity
of 0 (5 modifier). Melee attacks against a helpless target get a +4 bonus
(equivalent to attacking a prone target). Ranged attacks get no special bonus
against helpless targets. Rogues
can sneak attack helpless targets.
Editor’s Note: Grappling
There are some contradictions
between the various rules on grappling. What is correct?
To sum up the correct rules:
Grappling does not deny
you your Dexterity bonus to AC, whether you are the grappler or the target.
A grappled creature can still make a full attack.
Being pinned does not make you flat-footed, but you are denied your Dexterity bonus.
A creature grappling an
opponent typically needs to make two combat maneuver checks to pin someone (one
to grapple, the next to pin). If you’re pinned, do you also need to succeed
at two checks to escape, one for the grab and the other for the pin?
When a creature is pinned,
it gains this more severe version of the grappled condition, and the two conditions
do not stack (as described in the pinned condition). While this means that you
do not take both the penalties for both the grapple and the pin, this also means
that pinned supersedes the grapple condition; it does not compound it. For this
reason you only need to succeed one combat maneuver or Escape Artist check to
escape either a grapple or a pin.
As a standard action, you
can attempt to grapple a foe, hindering his combat options. If you do not have
Improved Grapple, grab, or a similar ability, attempting to grapple a foe provokes
an attack of opportunity from the target of your maneuver. humanoid creatures
without two free hands attempting to grapple a foe take a 4 penalty on
the combat maneuver roll. If successful, both you and the target gain the grappled
condition. If you successfully grapple a creature that is not adjacent to you,
move that creature to an adjacent open space (if no space is available, your
grapple fails). Although both creatures have the grappled condition, you can, as the creature that initiated the grapple, release the grapple as a free action, removing the condition from both you and the target. If you do not release the grapple, you must continue to make a check each round, as a standard action, to maintain the hold. If your target does not break the grapple, you get a +5 circumstance bonus on grapple checks made against the same target in subsequent rounds. Once you are grappling an opponent, a successful check allows you to continue grappling the foe, and also allows you to perform one of the following actions (as part of the standard action spent to maintain the grapple).
You can move both yourself and your target up to half your speed. At the end of your movement, you can place your target in any square adjacent to you. If you attempt to place your foe in a hazardous location, such as in a wall of fire or over a pit, the target receives a free attempt to break your grapple with a +4 bonus.
You can inflict damage to your target equal to your unarmed strike, a natural attack, or an attack made with armor spikes or a light or one-handed weapon. This damage can be either lethal or nonlethal.
You can give your opponent the pinned condition (see Conditions). Despite pinning your opponent, you still only have the grappled condition, but you lose your Dexterity bonus to AC.
If you have your target pinned, otherwise restrained, or unconscious, you can use rope to tie him up. This works like a pin effect, but the DC to escape the bonds is equal to 20 + your Combat Maneuver Bonus (instead of your CMD). The ropes do not need to make a check every round to maintain the pin. If you are grappling the target, you can attempt to tie him up in ropes, but doing so requires a combat maneuver check at a 10 penalty. If the DC to escape from these bindings is higher than 20 + the target’s CMB, the target cannot escape from the bonds, even with a natural 20 on the check.
If You Are Grappled
If you are grappled, you can attempt to break the grapple as a standard action by making a combat maneuver check (DC equal to your opponent’s CMD; this does not provoke an attack of opportunity) or Escape Artist check (with a DC equal to your opponent’s CMD). If you succeed, you break the grapple and can act normally. Alternatively, if you succeed, you can become the grappler, grappling the other creature (meaning that the other creature cannot freely release the grapple without making a combat maneuver check, while you can). Instead of attempting to break or reverse the grapple, you can take any action that doesn’t require two hands to perform, such as cast a spell or make an attack or full attack with a light or one-handed weapon against any creature within your reach, including the creature that is grappling you. See the grappled condition for additional details. If you are pinned, your actions are very limited. See the pinned condition in Conditions for additional details.
Multiple creatures can attempt to grapple one target. The creature that first initiates the grapple is the only one that makes a check, with a +2 bonus for each creature that assists in the grapple (using the Aid Another action). Multiple creatures can also assist another creature in breaking free from a grapple, with each creature that assists (using the Aid Another action) granting a +2 bonus on the grappled creature’s combat maneuver check.
As a standard action, taken during your move or as part of a charge, you can attempt to overrun your target, moving through its square. You can only overrun an opponent who is no more than one size category larger than you. If you do not have the Improved Overrun feat, or a similar ability, initiating an overrun provokes an attack of opportunity from the target of your maneuver. If your overrun attempt fails, you stop in the space directly in front of the opponent, or the nearest open space in front of the creature if there are other creatures occupying that space.
When you attempt to overrun a target, it can choose to avoid you, allowing you to pass through its square without requiring an attack. If your target does not avoid you, make a combat maneuver check as normal. If your maneuver is successful, you move through the target’s space. If your attack exceeds your opponent’s CMD by 5 or more, you move through the target’s space and the target is knocked prone. If the target has more than two legs, add +2 to the DC of the combat maneuver attack roll for each additional leg it has.
Source: Advanced Player’s Guide.
You can attempt to reposition a foe to a different location as a standard action. You can only reposition an opponent that is no more than one size category larger than you. A reposition attempts to force a foe to move to a different position in relation to your location without doing any harm. If you do not have the Improved Reposition feat or a similar ability, attempting to reposition a foe provokes an attack of opportunity from the target of your maneuver. You cannot use this maneuver to move a foe into a space that is intrinsically dangerous, such as a pit or wall of fire. If your attack is successful, you may move your target 5 feet to a new location. For every 5 by which your attack exceeds your opponent’s CMD, you can move the target an additional 5 feet. The target must remain within your reach at all times during this movement, except for the final 5 feet of
movement, which can be to a space adjacent to your reach.
An enemy being moved by
a reposition does not provoke an attack of opportunity because of the movement
unless you possess the Greater Reposition feat. You cannot move a creature into
a square that is occupied by a solid object or obstacle.
Source: Advanced Player’s
You can attempt to take
an item from a foe as a standard action. This maneuver can be used in melee
to take any item that is neither held nor hidden in a bag or pack. You must
have at least one hand free (holding nothing) to attempt this maneuver. You
must select the item to be taken before the check is made. Items that are simply
tucked into a belt or loosely attached (such as brooches or necklaces) are the
easiest to take. Items fastened to a foe (such as cloaks, sheathed weapons,
or pouches) are more difficult to take, and give the opponent a +5 bonus (or
greater) to his CMD. Items that are closely worn (such as armor, backpacks,
boots, clothing, or rings) cannot be taken with this maneuver. Items held in
the hands (such as wielded weapons or wands) also cannot be taken with the steal
maneuveryou must use the disarm combat maneuver instead. The GM is the
final arbiter of what items can be taken. If you do not have the Improved Steal
feat or a similar ability, attempting to steal an object provokes an attack
of opportunity from the target of your maneuver.
Although this maneuver
can only be performed if the target is within your reach, you can use a whip
to steal an object from a target within range with a 4 penalty on the
If your attack is successful,
you may take one item from your opponent. You must be able to reach the item
to be taken (subject to GM discretion). Your enemy is immediately aware of this
theft unless you possess the Greater Steal feat.in place of a melee attack
You can attempt to sunder
an item held or worn by your opponent as part of an attack action in place of
a melee attack in place of a melee attack* (see Editors Note: Multiple Sunder
Attempts). If you do not have the Improved Sunder feat, or a similar ability,
attempting to sunder an item provokes an attack of opportunity from the target
of your maneuver.
If your attack is successful,
you deal damage to the item normally. Damage that exceeds the object’s Hardness
is subtracted from its hit points. If an object has equal to or less than half
its total hit points remaining, it gains the broken condition. If the damage
you deal would reduce the object to less than 0 hit points, you can choose to
destroy it. If you do not choose to destroy it, the object is left with only
1 hit point and the broken condition.
Editor’s Note: Trip special feature required to Trip?
If you want to make a trip
combat maneuver, do you have to use a weapon with the trip special feature?
No. When making a trip
combat maneuver, you don’t have to use a weapon with the trip special feature–you
can use any weapon. For example, you can trip with a longsword or an unarmed
strike, even though those weapons don’t have the trip special feature. Note
that there is an advantage to using a weapon with the trip special feature (a.k.a.
a “trip weapon”) when making a trip combat maneuver: if your trip
attack fails by 10 or more, you can drop the trip weapon instead of being knocked
On a related note, you
don’t have to use a weapon with the disarm special feature (a.k.a. a “disarm
weapon”) when making a disarm combat maneuver–you can use any weapon.
You can attempt to trip your opponent in place of a melee attack. You can only trip an opponent who is no more than one size category larger than you. If you do not have the Improved Trip feat, or a similar ability, initiating a trip provokes an attack of opportunity from the target of your maneuver.
If your attack exceeds the target’s CMD, the target is knocked prone. If your attack fails by 10 or more, you are knocked prone instead. If the target has more than two legs, add +2 to the DC of the combat maneuver attack roll for each additional leg it has. Some creatures – such as oozes, creatures without legs, and flying creatures – cannot be tripped.
Note: Though the feint action is located here, near the rules for combat maneuvers, and while it seems like it might BE a combat maneuver, feinting is NOT a combat maneuver. The Paizo PRD is organized with the feint rules located in the same placement.
Feinting is a standard action. To feint, make a Bluff skill check. The DC of this check is equal to 10 + your opponent’s base attack bonus + your
opponent’s Wisdom modifier. If your opponent is trained in Sense Motive, the DC is instead equal to 10 + your opponent’s Sense Motive bonus, if higher. If successful, the next melee attack you make against the target does not allow him to use his Dexterity bonus to AC (if any). This attack must be made on or before your next turn.
When feinting against a non-humanoid you take a -4 penalty. Against a creature of animal Intelligence (1 or 2), you take a -8 penalty. Against a creature lacking an Intelligence score, it’s impossible. Feinting in combat does not provoke attacks of opportunity.
Feinting as a Move Action
With the Improved Feint feat, you can attempt a feint as a move action.
These rules cover being mounted on a horse in combat but can also be applied to more unusual steeds, such as a griffon or dragon.
Mounts in Combat
Horses, ponies, and riding dogs can serve readily as combat steeds. Mounts that do not possess combat training (see the Handle Animal skill) are frightened by combat. If you don’t dismount, you must make a DC 20 Ride check each round as a move action to control such a mount. If you succeed, you can perform a standard action after the move action. If you fail, the move action becomes a full-round action, and you can’t do anything else until your next turn.
Your mount acts on your initiative count as you direct it. You move at its speed, but the mount uses its action to move.
A horse (not a pony) is a Large creature and thus takes up a space 10 feet (2 squares) across. For simplicity, assume that you share your mount’s space during combat.
Combat while Mounted
With a DC 5 Ride check, you can guide your mount with your knees so as to use both hands to attack or defend yourself. This is a free action.
When you attack a creature smaller than your mount that is on foot, you get the +1 bonus on melee attacks for being on higher ground. If your mount moves more than 5 feet, you can only make a single melee attack. Essentially, you have to wait until the mount gets to your enemy before attacking, so you can’t make a full attack. Even at your mount’s full speed, you don’t take any penalty on melee attacks while mounted.
If your mount charges, you also take the AC penalty associated with a charge. If you make an attack at the end of the charge, you receive the bonus gained from the charge. When charging on horseback, you deal double damage with a lance (see Charge).
You can use ranged weapons while your mount is taking a double move, but at a -4 penalty on the attack roll. You can use ranged weapons while your mount is running (quadruple speed) at a -8 penalty. In either case, you make the attack roll when your mount has completed half its movement. You can make a full attack with a ranged weapon while your mount is moving. Likewise, you can take move actions normally.
Casting Spells While Mounted
You can cast a spell normally if your mount moves up to a normal move (its speed) either before or after you cast. If you have your mount move both before and after you cast a spell, then you’re casting the spell while the mount is moving, and you have to make a concentration check due to the vigorous motion (DC 10 + spell level) or lose the spell. If the mount is running (quadruple speed), you can cast a spell when your mount has moved up to twice its speed, but your concentration check is more difficult due to the violent motion (DC 15 + spell level).
If Your Mount Falls in Battle
If your mount falls, you have to succeed on a DC 15 Ride check to make a soft fall and take no damage. If the check fails, you take 1d6 points of damage.
If You Are Dropped
If you are knocked unconscious, you have a 50% chance to stay in the saddle (75% if you’re in a military saddle). Otherwise you fall and take 1d6 points of damage. Without you to guide it, your mount avoids combat.
Throw Splash Weapon
FYI: Splash Weapons
Make a ranged attack against an unoccupied grid intersection (AC 5 plus range penalties.)
Hit: Creatures in all adjacent squares are dealt splash damage. No creatures take direct hit damage.
Miss: First, roll 1d8 to determine the misdirection of the throw.
1 – Falls short (straight line towards the thrower.)
2 through 8 – Count around the target creature or grid intersection in a clockwise direction.
Then, count a number of squares in the indicated direction equal to the number of range increments thrown. The thrown object lands that number of spaces away from the target.
Finally, the item deals splash damage (if any) to all creatures in the square it lands in and in all adjacent squares.
If you attack with two weapons on your turn, do you also suffer the same attack penalty on attacks of opportunity made before the start of your next turn?
No. The penalties end as soon as you have completed the full-attack action that allowed you to attack with both weapons. Any attacks of opportunity you make are at your normal attack bonus.
Generally speaking, penalties on attacks made during your turn do not carry over to attacks of opportunity unless they specifically state otherwise (such as the penalty from using Power Attack or Combat Expertise).
A splash weapon is a ranged weapon that breaks on impact, splashing or scattering its contents over its target and nearby creatures or objects. To attack with a splash weapon, make a ranged touch attack against the target. Thrown splash weapons require no weapon proficiency, so you don’t take the -4 nonproficiency penalty. A hit deals direct hit damage to the target, and splash damage to all creatures within 5 feet of the target. If the target is Large or larger, you choose one of its squares and the splash damage affects creatures within 5 feet of that square. Splash weapons cannot deal precision-based damage (such as the damage from the rogue’s sneak attack class feature).
You can instead target a specific grid intersection. Treat this as a ranged attack against AC 5. However, if you target a grid intersection, creatures in all adjacent squares are dealt the splash damage, and the direct hit damage is not dealt to any creature. You can’t target a grid intersection occupied by a creature, such as a Large or larger creature; in this case, you’re aiming at the creature.
If you miss the target (whether aiming at a creature or a grid intersection), roll 1d8. This determines the misdirection of the throw, with 1 falling short (off-target in a straight line toward the thrower), and 2 through 8 rotating around the target creature or grid intersection in a clockwise direction. Then, count a number of squares in the indicated direction equal to the range increment of the throw. After you determine where the weapon landed, it deals splash damage to all creatures in that square and in all adjacent squares.
See FAQ at right for more
If you wield a second weapon
in your off hand, you can get one extra attack per round with that weapon. You
suffer a 6 penalty with your regular attack or attacks with your primary
hand and a 10 penalty to the attack with your off hand when you fight
this way. You can reduce these penalties in two ways. First, if your off-hand
weapon is light, the penalties are reduced by 2 each. An unarmed strike is always
considered light. Second, the Two-Weapon
Fighting feat lessens the primary hand
penalty by 2, and the off-hand penalty by 6.
Table: Two-weapon Fighting
Penalties summarizes the interaction of all these factors.
Table: Two-Weapon Fighting Penalties Circumstances Primary Hand Off Hand
Normal penalties 6 10
Off-hand weapon is light 4 8
Two-Weapon Fighting feat 4
Off-hand weapon is light and Two-Weapon Fighting feat -2 -2
You can use a double weapon to make an extra attack with the off-hand end of the weapon as if you were fighting with two weapons. The penalties apply as if the off-hand end of the weapon was a light weapons.
The same rules apply when you throw a weapon from each hand. Treat a dart or shuriken as a light weapons when used in this manner, and treat a bolas, javelin, net, or sling as a one-handed weapon.
Special Initiative Actions
Here are ways to change when you act during combat by altering your place in the initiative order.
By choosing to delay, you take no action and then act normally on whatever initiative count you decide to act. When you delay, you voluntarily reduce your own initiative result for the rest of the combat. When your new, lower initiative count comes up later in the same round, you can act normally. You can specify this new initiative result or just wait until some time later in the round and act then, thus fixing your new initiative count at that point.
You never get back the time you spend waiting to see what’s going to happen. You also can’t interrupt anyone else’s action (as you can with a readied action).
Initiative Consequences of Delaying
Your initiative result becomes the count on which you took the delayed action. If you come to your next action and have not yet performed an action, you don’t get to take a delayed action (though you can delay again).
If you take a delayed action in the next round, before your regular turn comes up, your initiative count rises to that new point in the order of battle, and you do not get your regular action that round.
The ready action lets you prepare to take an action later, after your turn is over but before your next one has begun. Readying is a standard action. It does not provoke an attack of opportunity (though the action that you ready might do so).
Readying an Action
You can ready a standard action, a move action, a swift action, or a free action. To do so, specify the action you will take and the conditions under which you will take it. Then, anytime before your next action, you may take the readied action in response to that condition. The action occurs just before the action that triggers it. If the triggered action is part of another character’s activities, you interrupt the other character. Assuming he is still capable of doing so, he continues his actions once you complete your readied action. Your initiative result changes. For the rest of the encounter, your initiative result is the count on which you took the readied action, and you act immediately ahead of the character whose action triggered your readied action.
You can take a 5-foot step as part of your readied action, but only if you don’t otherwise move any distance during the round.
Initiative Consequences of Readying
Your initiative result becomes the count on which you took the readied action. If you come to your next action and have not yet performed your readied action, you don’t get to take the readied action (though you can ready the same action again). If you take your readied action in the next round, before your regular turn comes up, your initiative count rises to that new point in the order of battle, and you do not get your regular action that round.
You can ready an attack against a spellcaster with the trigger “if she starts casting a spell.” If you damage the spellcaster, she may lose the spell she was trying to cast (as determined by her Spellcraft check result).
Readying to Counterspell
You may ready a counterspell against a spellcaster (often with the trigger “if she starts casting a spell”). In this case, when the spellcaster starts a spell, you get a chance to identify it with a Spellcraft check (DC 15 + spell level). If you do, and if you can cast that same spell (and are able to cast it and have it prepared, if you prepare spells), you can cast the spell as a counterspell and automatically ruin the other spellcaster’s spell. Counterspelling works even if one spell is divine and the other arcane.
A spellcaster can use dispel magic to counterspell another spellcaster, but it doesn’t always work.
Readying a Weapon against a Charge
You can ready weapons with the brace feature, setting them to receive charges. A readied weapon of this type deals double damage if you score a hit with it against a charging character.